2024年11月14日 · We are seeing the same "AP unable to handle additional clients" with some of our wireless clients, and we do have APs closer than necessary. It looks like this is addressed in Firmware 31.1.1, with the stable release candidate currently being 31.1.5.1. Has anyone tried the 31.1.X firmware versions?

2017年9月20日 · Thank you friend Fruju for the suggestion. I'm not really convinced of the recommendation, because if I go to "meraki dashboard / access point / wireless / access point page, if I select to update that single AP's firmware" that leads me to the "general / whole network" panel, where I see the mechanism or update schedule is configured for all available Aps and …

2024年10月18日 · CW9166 as it self is a general term that people tend to use. CW9166I is an AP with Internal omni-directional Antennas, not unlike 2802i, 3702i, etc. A CW9166I-MR indicates a 9166I AP in Meraki Persona, i.e. one that is fully managed in the Meraki Dashboard, just like an MR33 etc. CW9166D1 is an AP with internal directional antennas.

2021年8月24日 · Hi, I have an issue that I’d like some help with...I got a couple of Meraki access points that I’ve recently plugged in, and for some reason they just aren’t coming online. They show as offline in the Dashboard, and the only indicator I see on the AP itself is …

2020年4月7日 · This incorrect failure message does not affect the functionality of the AP and client devices connecting to that AP; Meraki has been made aware of this issue, which is being actively worked on and should be fixed in the future versions of R27.x firmware. Please be on the lookout in the changelog notes for this update.

2020年3月3日 · Hp @pavan_1379 go into the AirMarshal page and into the Rogue APs tab and then click into that 9N_F22B rogue AP, and you should at least see a MAC address, then go to Network Wide > Clients and search on the MAC, see if you can get a little more information about what device is broadcasting that SSID and where it is connected into your LAN and you can …

2024年4月1日 · I have it working pointing to the Meraki Local Auth and via NPS, the Local Auth method seems to take a long time to authenticate and I did have to reboot the AP to get it working. The lack of OCSP with Cloud PKI is a bit disappointing, only have CRL, which the Meraki Local Auth doesn't seem to support.

2023年2月8日 · Some enterprise prefer 'security' over user experience. I have mixed feelings over bpdu guard on AP but it can be done. Also if you use SecurePort ( RIP SecureConnect ) it will not override STP settings , so It would keep the bpdu guard from an access port. EDIT : TLDR : There is no good or bad answer to configure bpdu guard on Meraki AP ports.

2021年6月25日 · description Port Ready for Meraki AP switchport trunk encapsulation dot1q switchport trunk native vlan 165 switchport trunk allowed vlan 65,165,200 switchport mode trunk . In our division office that is using the MX100, we have two separate racks for Data switches and Voice switches. This is simply because the cubicles are wired with 2 jacks.

2025年2月18日 · We had 20 Meraki AP's running perfectly happy across a large site. We've recently closed the site and kept two of the MR46's to use in our new much smaller office suite. I've now setup the two MR46's with cabling direct to a Cisco Catalyst 9200 switch and they were running without issue for a couple of weeks and then on November 19th (i think ...