Scales and weighing equipment/hydraulic press and forming – mV sensors are used in hydraulic weighing and machine press applications to replace load cells. The mV output of the sensors is similar to the mV output of many load cells, allowing OEMs to minimize system redesign when upgrading from a load cell to a pressure sensor.

MLV 系列补偿传感器基于 All Sensors 的 CoBeam 2 TM 技术。该器件可在低工作电压下提供高输出信号，同时保持与在较高电压下工作的传统等效补偿毫伏传感器可比的输出电平。

Millivolt output pressure transducers provide the highest frequency response for any given pressure sensor technology because there is typically no signal conditioning electronics fitted. Therefore the response of a millivolt output signal is only limited by the natural frequency of the sensing diaphragm and not by any other components.

2023年7月14日 · I want to measure the DC voltage that is in the millivolt range of around <1mV to 200mV using electrodes. Is there a cost-effective method of using a certain amplifier that takes these small readings and gives output on &hellip;

2023年1月20日 · A millivolt (mV) output pressure sensor is a type of sensor that generates an output signal in millivolts, proportional to the pressure it measures. This output is typically a low-level voltage that changes with pressure and is usually derived directly from the sensing element, without any amplification.

Millivolt Industrial Pressure Sensors are available at Mouser Electronics. Mouser offers inventory, pricing, & datasheets for Millivolt Industrial Pressure Sensors.

The sensors provide a calibrated millivolt output with excellent output offset characteristics. The silicon, micromachined, and stress concentration-enhanced structure provides a linear output to measure pressure.

2025年3月27日 · Standard and custom pressure sensors with millivolt output signals ranging from 10mV/V up to 20mV/V. Ability to match lower outputs (2mV/V, 2.6mV/V, 3mV/V, and 5mV/V) for drop-in replacement of existing designs.

The Millivolt Output pressure sensor is based upon a proprietary packaging technology to reduce output offset or common mode errors. This model provides a calibrated millivolt output with excellent output offset characteristics.

The 13 and 43 are temperature compensated, piezoresistive silicon pressure sensors packaged in a TO-8 configuration. It provides excellent performance and long-term stability. Integral temperature compensation is provided over a range of 0-50°C using laser-trimmed resistors.