2020年4月29日 · The factory springs were somewhat progressive, I used the Moog springs on my 71, they are constant rate. This is why they are shorter, but the ride height is the same, and easier to install. This means they are a little stiffer in absorbing bumps, but will increase handling. You loose the softening of the top of the factory spring.

2020年6月23日 · Would the front coils be the problem? I saw some MOOG Corvette c3 coils on Amazon. They have two options: Are these MOOG coils any good? Don't know the spring rate (higher or lower rate then the original?) so... what would be the best choice of the two? What about the ride height after installation of new coils?

2015年11月17日 · C3 Tech/Performance - Moog 5758 vs Moog 5762 - I bought Moog 5762 for my 77. It had AC at the time but I completely removed it. Am I going to have a problem with height with the 5762? The specs on them vs the 5758 (for non ac cars) is VERY similar. I don't want my car all jacked up in the front but I don't want it...

Replace the worn out or sagging coil springs on your 63-82 Corvette with this set of black Front Heavy Duty Coil Springs from Moog. You'll have "like-new" steering and you'll no longer have premature tire wear because the car was misaligned. They've been 100% load tested and designed to lower stresses for a longer service life.

To be in line with the new OE design MOOG introduces a new pair of wishbone arms featuring front and centre bushes constructed from metal, this allowing for greater hold within the arm due to increased insertion force

Early models of the Citroën C2 and C3 were equipped with wishbone arms fitted with plastic-tube bushes : APPLICATIONS: CITROEN C2 - C3 2003 --> 2009; PEUGEOT 1007 2005-->

2009年1月8日 · Redoing a complete front end on my 71 big block with AC, including the steering (looking at converting to a Borgeson upgrade while i'm at it). Have many of the parts already or on order (KYB's, Moog mostly), with exception of coil springs. My front has 126K, original with even the riveted ball joints.

2014年8月4日 · C3 Tech/Performance - New Moog K6034 Upper Ball Joint Correct Installation Procedure - Sorry if this is an obvious or stupid question, but about to install my upper ball joints, which I purchased K6034's from rock auto, and I am not clear (based on the crappy instructions provided) the correct order of installation.