1999年4月19日 · C:\DRDOS\MSCDEX.EXE /D:MSCD001 /L:F The former loads the driver into memory, and the latter configures the MSCDEX.EXE program to interact with the driver, thus allowing the user (me) to access the CD-ROM drive. However, a problem has occurred. After installing the driver and restarting the system, one of two things happen 1.

1997年12月18日 · An if I didn't here it is: Command Line Switches The following is the command line for MSCDEX.EXE: MSCDEX.EXE: /D:x /M:n /E /V /L:x /S /K The following table defines the MSCDEX.EXE command-line switches: Switch Definition /D:<device name> - Allows you to specify a name for the device driver. This name must be identical to the device name used ...

2011年3月29日 · Download the best games on Windows & Mac. A vast selection of titles, DRM-free, with free goodies, and lots of pure customer love.

2004年3月17日 · Hi ram_einstein, In your bootdisk's CONFIG.SYS file, you will need: DEVICE=oakcdrom.sys /D:MSCD001 In your bootdisks's AUTOEXEC.BAT file, you will need: MSCDEX.EXE /D:MSCD001 /L:X SMARTDRV.EXE This should load your CD-ROM as drive letter X. You can change the X to another letter, or leave …

2002年11月4日 · Using the second (floppy) method is easier, but there are a few tricks... namely you need to install dos drivers for your CD drive, and MS-DOS CD Extentions (MSCDEX.EXE) in the floppy image to enable access to you CD drive. If you have SCSI CD drives, then you need the DOS SCSI drivers and SCSI CD drivers as well as MSCDEX.

2017年1月6日 · The application is called Software Toolworks Encyclopedia. It can't find CD-ROM drive when it is run under Windows XP. The same problem occured when it was run under windows 98 unless the bootable diskette was used instead of HD. (The bootable diskette contained MSCDEX. Unfortunately, my diskette drive is out of order.) Thanks in advance!

1998年9月21日 · DOS: Using MSCDEX.EXE to access the CD-ROM I don't remember the lines I must write in CONFIG.SYS and AUTOEXEC.BAT to install MSCDEX.EXE into my computer to be able to access the CD-ROM. Could you write it for me?

To create a bootable CD that has Ghost, you need to use MSCDEX to assign a drive for the Ghost program (and other partition management software) that won't fit in the bottable portion of the CD. System files and drivers fill up most of a 1.44 floppy used to create a bootable image.

2013年11月12日 · Download the best games on Windows & Mac. A vast selection of titles, DRM-free, with free goodies, and lots of pure customer love.

c:\mscdex.exe /d:mscd001 Exit and save. Restart the computer or virtual machine. Now move to your C drive and type: mscdex.exe: /d:mscd001 /M:5 /V /L:d /S /K (this part /M:x refers to the amount of buffers your drive has.. it's either 4 or 5. usually 5) Create a blank floppy image either in VMware or MagicIso, then mount that new one.