2016年12月24日 · I've replaced the N316 tuning solenoid valve and here's what I've noticed.... Reett engine warning light. Drove around, motorway included, without stopping the engine and light remains off. Pulled over, switched off engine, restarted engine and Light remained off.

2019年5月24日 · The new intake manifold will come with a new style Solenoid Valve for Intake Manifold Flap -N316-. Please reference TB 2047363 for installation of Clean Air Line. Reactions: Jetta 97

17439/P1031/004145 - Intake Manifold Tuning Valve (N316): Setpoint Not Reached Possible Causes. Intake Manifold Flap blocked/tight; Intake Manifold Tuning Valve (N316) faulty; Intake Manifold Tuning Valve Position Sensor (G336) faulty; Possible Solutions. Check Intake Manifold Tuning Valve (N316) Check Intake Manifold Tuning Valve Position ...

Replace failed vacuum lines or faulty vacuum solenoid (N316). Check Intake Manifold Runner Position Sensor 1 (G336) and wiring, see repair manual. Some vehicles may have a vacuum solenoid valve (N335 or V63) located under the air filter housing.

Note: The new intake manifold will come with a new style Solenoid Valve for Intake Manifold Flap (N316). Please reference TB 2047363 for installation of Clean Air Line. Note: If no carrier plate, vacuum line or vacuum tee related damage is identified, and the adaptation passes, diagnose the faults using guided fault finding.

2014年7月4日 · Ive got a bit of a problem with a 1.6FSI engine, the following code comes up on VCDS 17439/P1031/004145 - Intake Manifold Tuning Valve (N316): Setpoint...

2024年11月5日 · "...used gff to find fault code P2006 for intake manifold runner stuck closed. replaced the intake manifold runner control valve n316 with an updated part per TSB 10-24-03. this necessitated removing the intake manifold and disconnecting various connectors and hose/pipes to access the n316. cleared faults and test drove vehicle 5 miles, fault ...

2024年9月10日 · Replace failed vacuum lines or faulty vacuum solenoid (N316). Check Intake Manifold Runner Position Sensor 1 (G336) and wiring, see repair manual. 2004 Golf SE 1.6 FSI, BAG

2020年5月11日 · Replacement intake manifolds for CCTA engines have an improved intake manifold flap valve -N316.The new N316– valve has 3 hose ports rather than 2 (See Figure 1), requiring a fresh air line be installed during intake manifold replacement. This fresh air line will prevent dirt and debris from contaminating the –N316– solenoid. Production ...

When found in a VW Golf/Jetta (1K): 1.9l PD-TDI (BRM), check Engine Control Module (ECM) Software Version: 03G-906-016-AB @ 7328 or 7550 as well as 03G-906-016-AC @ 7280 or …