H-Series Breakout Cable - NZXT Support Center
2024年5月7日 · Depending on the model and time of when your case was purchased, your case may have included the H-series Breakout Cable. This cable allows any NZXT H-series case to adapt its front panel connector to a series of individual connections for use with non-standardized F_PANEL connections found on your motherboard.
NZXT Replacement Parts & Accessories Store - Upgrade Your PC
Upgrade & Maintain your PC NZXT accessories and parts to elevate or replace parts in your setup.
H510i | Compact Mid-Tower Case with RGB | NZXT
Taking it a step up from the H510, the H510i brings even more features to the H Series. The clean, modern design, iconic cable management bar, and uninterrupted tempered-glass side panel showcase your stunning build. Two Aer F120mm fans and removable filter on PSU intake. Case version fans and specs vary from retail version. Have a question?
Level 8: Cable Management - NZXT Support Center
2024年8月29日 · Run both the audio and front panel cables from the left cable channel to the openings at the bottom of the PC case. Both of these cables were included with your case. Your board may not have this port. If so, leave this cable unplugged. If your board supports USB-C, untie that cable and route it into a U31G2_C1 port. *Cable found in back of case.
Can someone help me with these cables on the nzxt h510 elite ... - Reddit
2021年3月23日 · At 53:25 this guide explains exactly what those cables are, and where they go. Note however, depending on your motherboard some may have a different location. I found …
NZXT H510 Series FAQ - NZXT Support Center
2024年4月9日 · How long of a riser cable do I need to use the built-in Vertical GPU mount in the H510i or H510 Elite? We recommend a 200mm long riser cable with a right-angle connector. While straight connectors can still work with the case, they …
[SOLVED] Cables in NZXT H510 - Tom's Hardware Forum
2019年12月29日 · The cable in your picture is the usb 3.1 gen 2 cable for the type C port on the front panel. From looking at the specs for your motherboard, unfortunately it does not have a header for that...
Build help: Front Panel connectors in an NZXT H510i case
2020年10月20日 · I'm trying to attach the front panel connectors (power switch, power led, etc.) in an NZXT H510i ATX case to a Gigabyte Aorus X570 Elite board. So, when I first did research about how to build a PC, I was under the impression that a case's front panel connectors would all be separate pins.
Nzxt Compact Mid-Tower ATX Case H510/H510i User Manual
Nzxt Compact Mid-Tower ATX Case [H510, H510i] User Manual. The Smart Device connects to your PC via a single internal USB 2.0 connector. To enable control of the Smart Device, download and install NZXT CAM from camwebapp.com. Visit nzxt.com/warranty and support.nzxt.com for information. on warranty coverage and service.
NZXT H510 Front Panel USB C connector - Linus Tech Tips
2019年11月3日 · I have a NZXT H510 that comes with a front panel USB C connector, but I can't find anywhere on the motherboard to plug it in. I have a MSI Tomahawk Max. Can someone help me out with this? Thanks!