2015年1月13日 · With support now available up to 2015, as well as Chrysler introducing multiple PCMs in the more recent years, I created this thread to aid in which PCM type you need to select to read your PCM. NOTE: You only will need to select a PCM type if VCM Suite doesn't recognize which type automatically when you press "Gather Info".

2023年11月28日 · I am using a 2009 Chrysler 300c PCM (also a 5.7 hemi, automatic, and unlocked) and am trying to flash my old tune (5.7 automatic challenger) onto this PCM. From my understanding, These are both the same NGC4 PCM, but different operating systems.

2015年6月24日 · I am considering doing a PCM swap for various tuning reasons, the NGC3 CAN pcm lacks a bit in the throttle body and idle tuning areas as compared to the NGC4. I am curious though if its a direct plug and play switch, besides flashing the PCM to match the VIN. Does anyone know? I would basically go get a 2007-2009 computer out of another 300C SRT8.

2021年1月13日 · If you're going to use an NGC4 PCM/TCM and have an 06-08 545RFE transmission, the engine and transmission wiring harness, all the engine sensors, Forward Control Module, etc. should be 06-08. If this is your setup, I wouldn't try to use the NGC3 PCM/TCM if you use all 06-08 stuff.

2018年9月20日 · Differences Between NGC3 and NGC4: On NGC3 controllers, internal communications between the PCM and TCM microprocessors takes place via a Dual-Port RAM chip. This integrated circuit allows the two microprocessors to directly share high-speed digital information internally without having to rely on the PCI Bus for all communications.

2015年6月24日 · I bought a new PCM, a NGC4, to put in my NGC3 CAN car (2006 300 SRT8). Two problems the dealer said I would face, (1) the process of updating the PCM to the latest firmware requires input of the VIN, my VIN is going to pull up …

2015年4月6日 · With support now available up to 2015, as well as Chrysler introducing multiple PCMs in the more recent years, I created this thread to aid in which PCM type you need to select to read your PCM. NOTE: You only will need to select a PCM type if VCM Suite doesn't recognize which type automatically when you press "Gather Info".

2020年6月25日 · The 07-08's have a faster bus controller (NGC4 instead of an NGC3) than the early ones, and my guess is that's why the HPT folks never tackled adding it.

BG Pro Tuner software was developed for both the Tuning Shop and or the individual that tunes Chrysler/Dodge/Jeep vehicles, It is easy to use and has many features found in other tuning software suites, comes with a hand held interface, tuning software, a specific vehicle licence, and supports both Domestic and International vehicles!

2022年8月24日 · I have replaced the NGC3 PCM/TCM in the 06 with one out of an 08 5.7 Hemi Jeep equipped with an NGC4 PCM/TCM that is supported by the HPT. It is a relatively easy swap. I picked up a used 08 Jeep PCM/TCM, P/N 05150258AC, operating system P/N 05187311AI and installed it in my 06 Jeep.