2024年10月21日 · To fix an SD card reader you need to replace the FPC connector socket which connects the SD card reader to the motherboard allowing it to properly function. For this project, experience with applying flux is strongly recommended.

2024年12月16日 · I have a v1 Switch that had the 1-bit mode error. I found the missing pins, and successfully added a jumper wire from the board to the SD card reader which resolved the problem. However, I didn't secure the connection on the board well enough, and the wire popped off taking the solder pads with it (Image attached).

2020年3月7日 · I had to open my own switch to check some diode values. After putting everything back together I noticed the console won’t read SD cards. I opened the back plate and noticed that the SD card reader FPC-connector seemed to miss one pin. What is the best practice to remove the sd card connector from FPC, so it won’t detach the pins?

2024年12月30日 · My switch has a pin missing on the FPC connector for the sd card reader. The missing pin is the DAT2 pin. I have tried taking it to a local repair shop who...

Help with audio or video issues, power troubleshooting, error messages and more can be found on our support site. Try finding help for your issue using the links below: If your system has been...

2023年9月23日 · Left circuit on Fpc connector 29 pin (Nintendo Switch lite) seems to be broken. Pin below is no connected, no solder below. What Can i do? 😅. Non-functional continuity test between the round and the pressed pin. I think 3 pins starting from the left are linked to the first circuit. But none works.

Fix a broken Nintendo Switch screen with this detailed tutorial (Full video on Youtube) @mklvrepairs repairing the LCD FPC connector. Learn the steps to bri...

2025年1月19日 · We've seen quite a few leaks, renders and mockups of the so-called "Nintendo Switch 2" recently which could indicate that the official announcement is imminent. After... The first big Nintendo release of the year also brings about the first big Nintendo game leak of the year. Leaked onto the internet two days before its release is...

2023年7月7日 · Hard to tell by the picture. I would expect four pads at the missing fpc connector. Thanks you so much I try it tomorrow. you need to use flux so the soldering isn’t so terrible. I have soldering data + and data - but no storage masses appeared on windows. I have color of picofly blue and yellow when I connect and don’t touch the boot button.

2023年3月12日 · My next steps would be to inspect the backlight circuit first. You might have an issue with the backlight driver, or maybe even something as simple as the backlight flex cable is not inserted properly. Replacing the LCD would be an absolute last resort option for me, personally. Ok. Any chance you’d be able to tell me exactly what I should do?