The error code E1 appears when Air plug is disconnected, Arm cuff is applied too loosely or Air is leaking from the arm cuff.

This video shows causes of Error E1 E2 E3 E4 E5 in Omron Blood Pressure Monitor device and How to Solve. This video also shows Best Practice while measuring Blood Measure using Omron...

2025年3月4日 · Position the cuff on your upper arm, about an inch above your elbow. Rest for at least five minutes before taking a reading. Sit comfortably with your back supported. Place your feet flat on the floor. Keep your arm at heart level during measurement. Verify the device is calibrated properly. Check the manual for calibration procedures.

It is possible that the cuff is leaking or the hose is not connected properly but more often than not it's a position issue. Please make sure you inspect the hose and cuff, the follow the …

Find solutions for blood pressure monitor error codes like E1, E2, E40 and others. Learn about error messages and troubleshooting tips.

2024年11月11日 · Cuff Symbol: This may indicate the cuff is not wrapped correctly or is too loose. Error Symbols (E1, E2, etc.): These indicate specific errors. Refer to your user manual for the meaning of each error code. Cuff Placement: Ensure the cuff is placed correctly on your upper arm, about 1 inch above the elbow.

2023年5月6日 · To fix error such as E1, E2, E3, or E4 on your OMRON display, try removing the device’s batteries and reinserting them. When taking reading, avoid sudden movements of your hands and body, ensure that the cuff is securely fastened to your arm, and keep your arm straight during the measurement.

2024年7月9日 · An "E3" error indicates the cuff is inflated past the maximum allowable pressure. To address this, make sure not to touch the cuff and/or bend the tub while taking a measurement.

Some common causes: You did not let all of the air out of the blood pressure cuff before trying to take your blood pressure. Make sure that there is no air in the cuff by squeezing it or rolling it, …

2023年4月9日 · Check the arm cuff for any air leakage and make sure to apply the arm cuff properly. It is a deflation error and is shown on the device monitor when the air cuff is over …