2019年9月14日 · Still a 2.0 ecoboost. Cranks, sometimes starts, sometimes not. About a month prior it just died, found that the fuel pump was bad, no fuel came out and wires looked burned up at the connections, like they got too hot. Well now I got a P00C6 code and actual low pressure is only 30psi not the desired 94psi.

Customer: Code P00C6 Fuel Rail Pressure Mechanic's Assistant: I understand that youre experiencing trouble with code P00C6 Fuel Rail Pressure, and the Ford Mechanic will be able to assist you in resolving this issue. Have you noticed any issues or issues with your vehicle related to the fuel rail pressure code?

Customer: 12 chevy traverse, has codes p0089, p00C6, p228C, display shows reduced engine power, stabilitrak and traction control Answered by david craig in 4 mins 4 months ago david craig

P00C6 is Fuel Rail Pressure Too Low-Engine Cranking. If you took the line coming into the high pressure pump and you had no fuel, the problem is the fuel pump itself. You have already replaced the Fuel Pump Driver Module which controls the fuel pump. The fuel pump in the fuel tank is the problem and will need to be replaced.

P00C6. P00C6 Fuel Rail Pressure Low During Engine Cranking. Code Setting Conditions: This DTC sets when the ECM has detected that the fuel rail pressure is not more than 3 MPa (435 psi) or is below 2 MPa (290 psi) when the engine is cranking. Possible Causes: 1. Failed High Pressure Fuel Pump. 2. A leak in the high pressure fuel system. 3.

Hi there! I'm Tom, a licensed mechanic, and I'd be happy to help you with your current car troubles. The specific codes we're currently facing are the P018D, indicating a high fuel pressure sensor B circuit, the P00C6 code indicating that the fuel rail pressure is too low during engine cranking, and lastly the P025B, which points to a fuel pump module control circuit range issue.

2023年5月14日 · 2013 Focus ST3 153k miles. Hey good friends, got misfiring and a blinking engine light when driving yesterday. Pulled over and didn't see the code for P00C6 until I drove to AutoZone/Home and already replaced my spark plugs. Is this code guaranteed to be the low pressure fuel pump like so many...

I’m sorry to hear that your 2014 Ford Focus 2.0 won’t start. The code P00C6 indicates that the fuel rail pressure is too low when the engine is cranking. This means that the high-pressure fuel system is not delivering enough fuel to the engine for it to start properly.

P00C6 - Fuel Rail Pressure Too Low - Engine Cranking (Bank 1) There are couple possibilities that could cause this condition : Low pressure fuel pumpFuel pump control moduleHigh pressure fuel pumpLeaking fuel injector Faulty fuel rail pressure sensor Wiring issue ECMEtc ...

2020年1月9日 · Pulled the codes and got P228C and P00C6. Started by replacing the Fuel Pressure Switch (ACDELCO) on the front of the tank. Cleared the codes, drove the vehicle and codes came back. Replaced the Mechanical High Pressure Fuel Pump (ACDELCO) on the Engine itself. Started the vehicle up and the same codes reappeared.