2018年7月5日 · So after installing a new (built) motor, can't seem to get this P0192 code figured out. Fuel rail pressure sensor circuit low input. From what I read, it means fuel pressure isn't hitting the desired target. I do have port injection that is T'd at the hpfp, but I am gettin fuel from the hose coming off the firewall.

2022年1月25日 · A few weeks ago I got an insane "misfire" and P0192 code which is for: "Fuel Rail Pressure Sensor Circuit Low Input". Misfire essentially feels like the car just shuts off for a cycle, not like a spark misfire, which makes sense given the code.

2023年8月22日 · However, when fully warmed up, I would still get some fuel cuts at greater than 1/2 throttle and higher in the rev rage (>5k RPM). Occasionally I would get a CEL and when I checked it out, it would be P0300 (random misfires) and P0192 (fuel pressure sensor input low). I checked the gaps on my spark plugs and all checked out OK.

2015年3月22日 · I was putting my truck back together from a head gasket job, I started the truck up, it ran fine. I detected a coolant leak at a hose. I shut the engine off to tighten the hose clamp. I start it back up again, and now I get P0192 Low Fuel Rail Sensor Voltage code. Truck's missing out and in limp mode (not revving over 2000 rpm.)

2019年7月29日 · It popped up with the P0192 & P0652 codes, prior to this the truck was running fine and going 75 mph down the freeway. I cleared the codes and they haven't come back yet. I was able to finish my drive home approx. 4 more hours of driving and its been a couple of days being home doing normal around the town stuff and the truck still seems fine.

2024年11月29日 · Alright hopefully this is the right way of posting it, But issue Im having is the p0192 , Kept erasing the code and didnt think of it. On thanksgiving day gave it gas and then boom car went into limp mode got it into parking lot.. …

2017年11月5日 · I started the car last night after sitting for 4 months; primed the car at least 5 times before starting. Initially it started and idled fine - after 2 mins it began cutting out. Last night I got codes P0091 and P0192. Today I tried again after cleaning the connection/plug for the fuel rail pressure sensor. Started fine but died after 1 minute.

2020年6月6日 · having Fueling issues in my MS3 its a P0192 Code 'Fuel Rail Pressure Sensor Circuit Low Input' i have change the fuel pressure sensor still having the same problem.. i just got a new hardness for the car i just to know what else you guys think it is? ..the car been sitting for months i really to fix this ASAP thanks.

2022年9月27日 · If the engine bogged down for long enough it would throw codes P0300 and P0192. I looked around the forums/online and followed the common advice of cleaning the HPFP internals, checking the ground by the HPFP, replacing the pressure relief valve on the fuel rail, and replacing the in tank fuel pump.

2011年9月21日 · The truck will run fine for a couple days and then it will start missing and running like crap. Throws P0192 (fuel rail pressure sensor circuit low input). After I clear the code it will still run like crap and then it might be fine for a couple days. Any thoughts or suggestions are much...