2011年6月27日 · What sensor senses and trips a P0230 fault?? What is the voltage path leading from the source, to the actual transfer pump. It is the original that is engine mounted. From what I was able to glean, it comes from the ECM. I would like to restore things back to normal but Dodge is no help at all (of course). Please advise.

2019年12月22日 · General F150 Discussion - P0230 (Will crank but no start) - I own a 2013 Ford F-150 3.7 V6 XL 4WD regular Cab. Its a normal day about 40F and i go and pull my truck out of the garage, works fine starts right up and I drive out. I remembered that I forgot something so I shut it off and go back inside. Once I return I...

Fault code P0230 indicates a fuel pump circuit fault. The most common cause we run into is the fuel pump flow control module failing internally to where it has to be replaced. Posted below is the diagnostic test procedure that needs to be followed as well as the wiring diagram layout and connector layouts to help with the testing.

Here is the definition for this code. P0230 Fuel Pump Relay Control Circuit Malfunction. Possible causes. Fuel pump relay has failedFP relay control circuit is open, shorted to ground or shorted to voltageFP relay Ignition circuit is open (check the PCM 'B' fuse in the U/H fuse block)FP relay connector is damaged (check pins for damage, and for moisture)PCM has failed

Customer: Had fault code p0230. I replaced the fuel pump. Car starts and will run for a while but the it will start to stall and eng8ne will cut off. It will start right back up again and run for a while and then start to stall and engine will go off again. I do not get any codes .

Ok for p0230 code. I have brand new batteries from about a week ago. I can hear the lift pump running and fuel pressure gauge is located at the injection pump so I know I'm getting fuel from lift pump.

Customer: 2013 F150 Ford 5.0 p0230-14. Did the fuse box upgrade replace the fuel pump driver module was fine for a few days then the code reoccurred no start. If i jump out the fuel pump relay it runs fine

P0230 - Fuel Pump Primary Circuit MalfunctionP0446 - Evaporative Emission Control System Vent Control Circuit MalfunctionP0455 - Evaporative Emission Control System Large Leak Detected. The ones for the EVAP are most likely caused by a leak on the circuit, which would need to be inspected with a smoke machine. Possibilities would be :

Fault code P0230 indicates that the engine computer has detected an issue with the fuel pump relay control circuit. This could be due to a problem with the fuel pump relay, a wiring issue, or the PCM (engine computer) itself. Such issues may result in hard starting, no start, or stalling.

08 Avalanche has Code P0230 & P069e, the dealership has so far replaced the fuse block, the FSCM Module & the PCM, still Mechanic's Assistant chat Customer: 08 Avalanche has Code P0230 & P069e, the dealership has so far replaced the fuse block, the FSCM Module & the PCM, still have Engine light on with the above codes.