2014年12月21日 · 2008 Chevy 3500HD 6.6L/6spd Allison Quad Cab Long Box 2004 Chevy Tahoe 5.3L/4L60E - Daily Beater Ride 2001 Chevy 2500HD 6.0L/4L80E Stage 2 rebuild Quad Cab Long Box

If the KS system is operating normally, the PCM should monitor the KS voltage varying above and below calculated average voltage. If the PCM detects a KS 1 signal or KS 2 signal voltage within the calculated average range, a Diagnostic Trouble Code (DTC) will be set. DTC P0332 refers to the rear knock sensor.

2022年10月11日 · P0332 denotes Knock sensor bank 2. Bank 2 wire is Light Blue. (Bank 1 should be dark blue). With engine running what kind of voltage reading are you getting off of both the bank 1 and 2 knock sensors? (Dont disconnect harness anywhere while taking reading).

Customer: Knock sensor codes P0332 & P0327 Mechanic's Assistant: What is the model/year of your Chevy? Customer: 2001 Chevrolet Suburban 2500 6.0L Mechanic's Assistant: Are you fixing your vehicle yourself? What have you tried so far? Customer: Yes. I replaced the knock sensors and harness (twice).

The P0332 is a fairly straight forward code pointing to a problem with the Bank-2 knock sensor. This sensor is located on the lower passenger's side of the vehicle (see image below). Carefully inspect the electrical connector and wire harness for any loose, broken or damaged wires.

P0332 Knock Sensor Circuit Low Frequency (Bank 2) Possible Causes Knock sensor ground circuit is open (check for proper torque)Knock sensor signal circuit is open, shorted to ground or shorted to voltageKnock sensor connector is damaged (check pins for damage, and for moisture)Knock sensor has failedPCM has failed

I have a 2000 chevy suburban 5.3. and i have the p0332 code and the p1635 code. i know the p0332 is for the knock sensor KMP1171 | Mech for 20yrs and GM Specific for 15 156 Satisfied Customers

07 Chevy 1500 4wd 5.3 Vin: ***** P0332 Need labor time and location/directions to change the knock sensor Mike V. | 25 years automotive experience, Certified Subaru Tech and Nissan factory trained. 62,182 Satisfied Customers

Replaced both knock sensors on a 04 chevy silverado, now i have codes p0171, p0332, p0327, Could it be the EGR valve? or GM Tech (Cam) | GM Grand Master Technician 2007. 14 years experience. 32,709 Satisfied Customers

Customer: I keep getting p0332 and p0327 codes. I changed both the sensors and the wiring. the enging light was going off except when I run the rpms up, like when I was passing. but the light has stayed on for about a 1000 miles or since I changed the sensors.