2012年2月12日 · P0611 FICM Fuel injector control module performance Internal FICM failure This is caused from weak or bad batteries must get new ones or have them fully charged then load tested if over 3-4years old get new ones also heat kills the ficm it sets in a bad place for heat.

2008年2月14日 · there is a tsb for a p0611 ficm performance for a pushed out/loose fuse, but usually if injector driver circuit low(p283,p275 etc) are tripped as well, you'll be needing a new ficm, i forget which pin you run a fused wire to ground at connector c of the ficm and check all of your voltages, if they are all 12v, replace ficm and retest, had a few ...

A stored code P0611 means that the powertrain control module (PCM) has detected an internal control module performance issue. The malfunction is related to the portion of the PCM that controls fuel injector function. In some cases, the fuel injector controller may be separate from the PCM. Most frequently, it is integrated into the PCM.

2013年3月24日 · p0611 Jump to Latest 6.6K views 20 replies 8 participants last post by Dr C May 7, 2013

P0611-55 fuel injector adjustment value. How to solve this problem? Nissan X-Trail. 2013. Oil injectors are code AAAAAAA

P0611. Descriptor. Probable Causes. Internal Fuel Injection Control Module (FICM) Failure. Customer. where ...

Check engine light came on p0611 fuel injector control module, Solid turned on today, 2013 cls 550, No Mechanic's Assistant chat Customer: Check engine light came on p0611 fuel injector control module Mechanic's Assistant: Is the check engine light blinking or flashing, or is it solid?

2012年12月3日 · I need some help from the Pros. 06 with 85,000 miles is getting a P0611 code but when I checked the voltage with a volt meter it shows 48v with key on and 47.4 volts while cranking and also 47.4 while running. The truck runs bad when cold even in 60 degree weather and starts with no problems...

2013年5月29日 · The engine turns over, but does not start. Keeps setting codes P0261, P0264, P0267, P0270, P0273. P0276, P0279,P0282, and P0611 in the Key On Engine Off (KOEO) self test.... 2005 Ford F-250 Super Duty 6.0L, DIESEL, Vin P, Turbo, Eng Cfg V8 Test Details... Confirmed Fix Details... Tests/Procedures: 1.

2012年10月15日 · In most cases the code P0611 is set due to a failing Fuel injector Control Module (FICM) and usually replacing it will resolve this code and concern. This is a very common proplem on the 6.0. This is a very common proplem on the 6.0.