Code P070C is set when the PCM detects a low transmission fluid level sensor signal. This usually indicates the circuit is shorted. Related codes include P070A, P070B, P070D, P070E, and P070F. The severity of this transmission code is moderate to severe.

May 8, 2019 · Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector pins. Need more information about the P070C code? Need more information on how to fix the P070C code? Get Access to Factory Service Manuals. No comments found for this page.

Feb 19, 2025 · What does the P070C code mean? The P070C code is a diagnostic trouble code that indicates an issue with the transmission fluid level sensor circuit. This sensor plays a vital role in monitoring the amount of transmission fluid within your vehicle’s system.

DTC P070C indicates the TCM has detected a voltage signal from the OLS in the low error zone. This may be caused by the following: 1. Open or short to ground in W112 or W116 circuits.

The fault code p070c can be caused by low transmission fluid level, a faulty transmission fluid level sensor, an open or shorted sensor harness, or a poor electrical connection in the sensor circuit.

3 days ago · DTC P070C sets if the OLS signal voltage (sensor voltage in the diagnostic tool data monitor grid) is less than 0.1V (100mV) thirteen times or more with twenty-six seconds. ACTION TAKEN WHEN THE DTC SETS: When DTC P070C is active, following conditions occur: 1. The TCM does not illuminate the CHECK TRANS light. 2. DTC is stored in TCM history. 3.

May 8, 2019 · Learn what Transmission Fluid Level Sensor Circuit Low means, location and how to repair?

Sep 8, 2024 · The P070C: Transmission Fluid Level Sensor Circuit Low refers to a low signal being received from the transmission fluid level sensor. This could be due to a faulty sensor, wiring problems, or connection issues, leading to incorrect transmission fluid readings. P070C – Quick Overview

What does OBD-II fault code P070C mean? OBD-II Code Transmission may not shift properly is defined as a Transmission Fluid Level Sensor Circuit Low. The Transmission Fluid Level …

OBD-II Code P070C is a general transmission code that is found on vehicles with an automatic transmission. The code is set when the transmission control module (TCM) detects a low voltage or an open circuit in the circuit of the transmission fluid level sensor.