2021年11月14日 · The P0868 code is a generic OBD-II code that detects a problem with the transmission fluid pressure. Transmission fluid serves to lubricate the transmission, and for vehicles with automatic transmissions, to cool the transmission system as well.

2016年10月26日 · p0868-line pressure low Theory of Operation Line pressure is measured by the Line Pressure Sensor (LPS) and regulation is achieved by changing the duty cycle of the Pressure Control Solenoid (PCS) controlled by the Transmission Control System, (5% duty cycle = solenoid off = Max line pressure, 62% duty cycle = solenoid on = Min line pressure).

2024年4月19日 · So I bought a used 2016 2500 5.7 for my work truck. Threw a P0868 before I got home from dealer. LOL. Anyway after researching a bit I finally got around to figuring it out today. First thing I did was check fluid level. I got the tranny up to temp running some errands then came home, parked it...

2014年1月22日 · DTC P0868 SECONDARY PRESSURE DOWN PFP:31941 The pressure control solenoid valve B (secondary pressure solenoid valve) regulates the secondary pressure to suit the driving condition in response to a signal sent from the …

2019年7月28日 · Hi all, new to the forum, hoping to get some help and give some help when I can. My Ram is throwing a soft code..p0868. I had previously replaced (8 years ago) the governor pressure solenoid and transducer with the DNC billet adapter and new Borg Warner solenoid and rastra? Transducer. The other day I thought I'd lost first gear. Did some research.. Pointing me towards replacing the solenoid ...

2019年8月7日 · P0868 code did not appear until after I finished that drive and returned to just driving around town. Temperatures normal, in fact I don't think this transmission's ever seen the high side of 180F and recently hasn't seen the high side of 150.

2020年8月20日 · Hello all, I was driving around today and started futzing around with my RaceME. Checked DTC codes and came up with a p0868 code, for low line pressure. No check engine light. Yesterday I towed about 8,800 lbs noticed slightly firmer shifts but nothing that jumped out at me. Line pressure seems normal, 160-170 normal driving. C

2021年11月22日 · 3) Code P0868 is stored in the Transmission Control Module (TCM). I have no hesitation while accelerating from a stop, but for the rest it looks to be a match. I cleaned the loom connection to the transmission as this is one of the steps recommended. The …

2020年7月26日 · P0868 is a death sentence on these CVTs. If pep boys did not touch the transmission then it may just be coincidental. Sell the car if you can for whatever you can get for it and invest in a different one without a CVT. If that’s not possible, you are looking at 4-5K at least for a reman CVT.

2024年9月23日 · With a "P0868 governor pressure sensor voltage too high" On the smarty. I can shut the truck off, clear the light, and restart, it's okay. Lockup is acceptable, but overdrive didn't kick in when I called for it. "Voltage too high"; am I looking for an electrical open circuit on that 8-pin connector harness? What is the Governor sensor?