2010年8月15日 · p1272 fuel rail pressure sensor in a nut shell you were giveing it some and the fuel pressure spiked in the rail above the safe zone so the computer said open the flood gates …

2005年8月6日 · I recently replaced my number 2 and 4 injectors as well as my IDM Now that it is back together it has a rough idle along with the SES light coming on with or without my …

2014年8月30日 · Hey guys I have been having a problem with loss of power when driving and just at idle. Was also due for a service so got my uncle to plug in his scanner and came up with 2 …

Hi, My 2008 D40 diesel Navara is spitting out fault code P1272. Car goes into limp mode with heavy acceleration. Ecu rest works for the short term, but...

2011年1月29日 · So the dreaded limp mode has struck again.. managed to read the fault code via TorquePro P1272 has anyone definitively figured out what is the cause... SCV, Fuel Pump, …

2023年10月13日 · A couple weeks ago while sitting at idle I had my check engine light come on in my 2002 F-250 and the truck started running really rough. After pulling codes there was a …

2013年2月19日 · hey guy just wondering if any has had their car go into limp more while driving? mine cut out 3 times today and i used my torque pro on my phone and said a P1272 code was …

2006年11月21日 · P1272-when you are checking the UVC connector, the block wire connector that you pull apart over te top of the VC, hold it upright and check the bottom row of wires for …

2012年11月17日 · You should be able to locate a generic bosch sensor from any reasonable auto electrician, not sure about Nissans, but changed the wife's Honda's oxy sensor recently, …

2007年10月6日 · 1999 F-250 7.3L PSD Intermittently over about 1-week, Service Engine light would come on while driving, run rough, then clear up after a minute or so. Started to run …