2016年12月3日 · Hey guys, I just replaced my intake manifold on my 2008 tsi gti, and as soon as I started it, I had a "P2008 Intake Manifold Runner Circuit Open Bank 1" code. I cleared it with my apr mobile dongle, and it comes right back immediately.

2019年4月7日 · Currently getting a P2008 Intake Manifold Runner Control Circuit Open Bank 1. Intake Manifold was replaced by the owner, there was some questions regarding removal of the sensors so we Replaced the intake manifold assembly with a new OEM model from VW.

2024年11月25日 · The P2008 code signals a problem with the intake manifold runner control circuit on bank 1. This vital component helps optimize engine performance by regulating airflow. Recognizing this issue early can save you from more extensive repairs down the line.

The P2008 fault code in automobiles refers to a problem with the Intake Manifold Runner Control (IMRC) actuator. The most common symptom of this issue is the Engine Light turning on. The cause of this fault code could be a faulty IMRC actuator, an open or shorted IMRC actuator harness, a poor electrical connection in the IMRC actuator circuit ...

2023年7月3日 · What does the P2008 code mean? The P2008 code relates to the intake manifold runner control circuit. The intake manifold is responsible for directing the air and fuel mixture into the engine, and the runner control circuit is responsible for controlling the flow of …

2023年9月10日 · There is a sheered/chewed through connector that I believe is causing code P2008, “intake manifold runner circuit open”. I assume the connector is still plugged in somewhere but for the life of me I can’t find where the connector is. I’ll upload pictures below, and also link to a video that shows things a little better.

2017年4月30日 · OBD II fault code P2008 is a generic code that is most commonly defined as “Intake manifold air control actuator / solenoid, Bank 1 -open circuit”, but sometimes also as “Intake Manifold Runner Control (IMRC) Solenoid Control Circuit –Bank 1”, or less often as “Intake Manifold Runner Control Circuit/Open Bank 1”.

2024年9月4日 · P2008 is a generic powertrain code that specifically refers to an open circuit in the intake manifold runner control system on bank 1 of the engine. The code indicates that the Engine Control Module (ECM) has detected an electrical issue in the circuit controlling the intake manifold runner flaps or valves.

2018年9月26日 · Switch Ignition OFF for at least 60 seconds. Timing chain driven engines such as the CCTA, CBFA and CCTA were phased in during model year 2008. Those engines use an entirely different IMRC system which uses engine vacuum in conjunction with a solenoid so Basic Settings 142 must be completed at idle.

The OBD trouble code P2008 is a generic powertrain code, which means that it applies to all 1996-newer vehicles (Ford, VW, Audi, GM, etc.). Although generic, the engines differ between brands and may have slightly different causes for this code.