Customer: I have an engine code P2104 Throttle Actuator Control System Forced Idle Can you tell me what this means? if there's a bad sensor,can you tell me it's name and location?a diagram would be good.

Dec 18, 2011 · I had the code checked...P2104 Throttle Actuator Control System Forced Idle. The truck still runs fine but any ideas on how to fix it and make the light go off?

Nov 9, 2007 · P2104 - Throttle Actuator Control (TAC) System - Forced Idle P2112 - Throttle Actuator Control (TAC) System - Stuck Closed. P2104 was set because the pcm had to step in to set the idle. The TAC system is in the failure mode effects management (FMEM) mode of forced idle. P2104 is just an informative code, set because of P2112. P2112 possible causes: Binding throttle body, stuck closed or ...

Customer: My 2005 Mustang has 2 codes P2111 and P2104. First one says Throttle actuator is stuck closed and second says throttle actuator is in forced idle. Changed throttle body motor and throttle position sensor. No effect..? What is my problem?

Have a ford econoline e450 giving codes p2104, p2123, p2127 and p2132. We replaced the throttle body and accelerator

My mustang is throwing codes p2111, p2104, and p061F, p2111 stuck open p2103 forced idle p2104* p061F-forced Idle,, it

Customer: I have the codes P2112 & P2104 after replacing a battery Mechanic's Assistant: Just to clarify, what's the exact code? And have you tried to reset it? Customer: It’s a fault with the throttle actuator control system I have not, do you mean reseting the battery? Mechanic's Assistant: What is the model/year of your Ford? Customer: 2008 ford …

Dec 30, 2012 · My truck kicked into engine failsafe mode, and reads the following error codes P2104, "throttle actuator control system forced idle", and P2112 "throttle actuator control system stuck closed."

Customer: 08 f150 xlt 4.6 liter codes p2104, p2107,& p2110 dead pedal on my truck. Mechanic's Assistant: Just to clarify, what's the exact code? And have you tried to reset it? Customer: yes I tried resetting disconnected battery and cleared with scanner. these are hard codes come back immediately . 3 codes p2104, p2107, p2110 wrench light …

Welcome to Justanswer, my name is XXXXX XXXXX I will try to assist you. The P505 is an idle air control problem and the P2014 and P2111 are throttle body codes and in most case all three are set due to the throttle body has failed.