P2714. The ECM detects a malfunction in the shift solenoid valve SLT (ON side) according to the difference in the speed between the turbine and the output shaft, and also by the ATF pressure. (2 trip detection logic)

P2714: Transmission Pressure Control Solenoid Circuit – Explained. The P2714 code refers to the Pressure Control Solenoid ‘D’ PerformanceStuck Off. Shift solenoid valve SLT controls the transmission line pressure for smooth transmission operation. The ECM adjusts the current to the shift solenoid valve SLT to control hydraulic line pressure.

Performing the ACTIVE TEST using the intelligent tester allows components, such as the relay, VSV, and actuator, to be operated without removing any parts. Performing the ACTIVE TEST as a first step of troubleshooting is one method of shortening labor time. It is possible to display the DATA LIST during the ACTIVE TEST. Warm up the engine.

TRANSMISSION [ECT] 05−1031 Author: Date: 1218 2005 LEXUS GX470 REPAIR MANUAL (RM1164U) DTC P2714 PRESSURE CONTROL SOLENOID ”D” PERFORMANCE (SHIFT SOLENOID VALVE SLT) SYSTEM DESCRIPTION The linear solenoid valve (SLT) controls the transmission line pressure for smooth transmission operation based on signals

DTC P2714 may be caused by: 1. Output speed sensor signal circuit issues. 2. Turbine speed sensor signal circuit issues. 3. Low clutch pressures, main pressure, or control main pressure. 4.

2022年9月21日 · Shift solenoid valve SLT controls the transmission line pressure for smooth transmission operation based on signals from the throttle position sensor and vehicle speed sensor. The Engine Control Module (ECM) adjusts the current to the shift solenoid valve SLT to control hydraulic line pressure coming from the primary regulator valve.

The P2714 code for Toyota vehicles indicates a performance issue with the Pressure Control Solenoid 'D', which is responsible for regulating hydraulic pressure in the transmission. This solenoid plays a crucial role in controlling the shifting of gears and ensuring smooth operation of the transmission system.

壓力控制電磁閥的作用就是控制變速器液的壓力。 該故障碼的原因包括壓力控制電磁閥本身，電路，接頭等。 同時要注意，變速箱控制電磁閥故障有些情況下並不並不是因為電子問題，而是由於管路阻塞或者是機械方面的問題。 好多時候，僅僅因為變速箱油太髒就會造成很多這方面的故障。 本站提供的信息僅供參考, 如果您需要更多的資訊, 請詢問您的工程師.

El código de falla P2714 indica que el Solenoide de Control de Presión de la Transmisión D se encuentra atascado en apagado.

2024年3月15日 · Upon restarting the truck, the check engine light, trac off message came on, and the 4LO light was blinking. Took in for diagnostic and codes P0761 and P2714 came up which I think is solenoid C and D throwing a fault. I personally haven't …