2014年3月8日 · Replacing this has cleared the first error 3FF0 (P3263) Air Mass Flow Sensor. The other 4 codes will not clear and show up instantly after re-scan. Please any advice would be appreciated.

2021年2月14日 · Now the issues getting code p3263 On start up cuts out then after a few try’s it’s hunting in revs then finally settles. After that car drives fine for a bit then decides to have no boost what’s so ever and

2013年10月17日 · So i noticed the X5 was bit sluggish recently, and then the other day, pulling off a roundabout, the car had no power - like it was in the wrong gear. It eventually chose a gear and shot off. It then threw up the "Emissions Warning" light. I drove it 60 odd miles in manual and drove fine to my folks who had an OBD2 reader and gave me the code ...

2013年9月3日 · Scaned the car today with a obd2 reader and got the message p3263 manufacture specific code . I had my thoughs it was the maf after recently installing an air filter. So i cleaned the maf and deleted the code. So far the light has remained off. But id be greatful for any information about the code incase it cmes back.

2013年1月29日 · Could the code mean p0263? that would make it a power balance fault on cylinder one and is likely a fault calculated by the DDE from inputs of various sensors rather than a single specific sensor. If Jimbo75 is on the right school of thought with a swirl flap issue I would check them ASAP. Could you describe the running problem as well as the code?

2019年5月3日 · And reasamble this BMW M47N2 masterpiece back and car runs now smoothly, for now 🙂. Things I did: – replaced injector seals. – replaced valve cover gasket. – checked turbo. -cleaned MAF and MAP sensors. -cleaned intake and replaced seals. -repaired flap. – cleaned and checked EGR. – checked all injectors. -checked engine compression. A lot of work.

2016年8月5日 · the P3263 was listed against a MAF sensor, which I would have already cleaned if it wasn't for the amazon delivery guy...anyway so i cleared these faults and the only one to immediately come back is the Glow Plug Control Unit, which doesn't trigger the EML.

2022年2月14日 · Hello, I have a BMW X3 E83 that lately was consuming a lot of oil. The fact is that now it seems that due to excessive consumption I have just clogged the FAP and oxygen …

2024年1月13日 · I have a problem with my BMW x3 2.0 m47 from 2005. I can't find any solution. fault codes are p3263 and 3ff0. I've changed the turbine, all the hose seals, the vacuum valves, the maf sensor and the map sensor, but I still can't find a solution.

I drove it 60 odd miles in manual and drove fine to my folks who had an OBD2 reader and gave me the code P3263. I stripped down the air filter and spayed cleaner into the MAF, cleared the code...