2018年11月25日 · When the load is low/close to idle, the CPU temperature is around 45 C, GPU temperature around 50 C but the PCH Temperature is around 90 C. Despite the PCH temperature is at 90C, the fan seems to be running at low speed. pch_cannonlake-virtual-0 Adapter: Virtual device temp1: +91.0°C . acpitz-virtual-0 Adapter: Virtual device temp1: +30.0°C

2016年4月1日 · PCH temperature sensor for Intel chipsets is designed to show the temperature of +50 °C, and I saw only one program that it read at lower values, the truth lied shamelessly when it has been seen by a thermocouple attached to an ICH10 chip surface - she showed +35 °C and the program reported the +23 °C, +47 °C is such that you can not trust her testimony, because I …

2012年8月5日 · This PCH has a small heatsink, without a heat pipe, and only services the PCH. It has a decorative cover on it that hides most of the heat sinks surface. I had the PC on for an hour, and HWiNFO64 showed the Current PCH temp as 45C (Min of 43C, Max of 51C), which was a stable value at the time of my testing.

2024年10月6日 · However, after updating some drivers, I've noticed that the motherboard temperature has risen significantly. With the laptop at idle, it reaches up to 90 degrees. My previous Omen laptop did not have such high PCH temperatures. I assume these chips can handle that, but it's not healthy for the laptop to reach such high temperatures while idle.

2020年7月4日 · HWiNFO is a great app! I hate to sound unappreciative, but it doesn't display PCH Diode temperature in the same way as AIDA64 as shown below. Does HWiNFO64 show this differently? If so, where and how? BTW, the readings shown is that of a Vostro 3560. When I first ran HWiNFO64 and selected...

2021年4月7日 · I'm getting a PCH temp of 74-80C on the Asus Maximus XIII Hero motherboard. EC sensors reports PCH 60C. Does @Martin know anything about Z590 PCH temps? The BIOS reports the higher 74-80C temp...

2015年5月3日 · Diodo PCH 50 °C (122 °F) PD: this temp is in destock, playing music, with the web navigator open, and my CPU has not activate turbo boost technology, and may case is corsair carbide 500R. I replaced the series fan for cooler master sikeflow. Those are working at 1850RPM, and the cooler side was replaced for in win cooler fan 140mm.

2019年11月4日 · I don't think you should worry, Gigabyte made the fan curve according to the lower temp sensor reading, i dont remember right now but if you check the fan curve in UEFI you will see in silent profile for example that the curve maxes the fan at 90 degrees, and if you see in one of your images where the first sensor is at 95 degrees your chipset fan is at 3000rpm which is not 100% as it ...

2020年9月14日 · I also have 2 Chipset temp readings on my board in HWiNFO‘s sensors with ~20C difference. In BIOS’s smartFan section there is only one reading about PCH and it matches the lower one. I also confirm it with board software by vendor (Gigabyte) that the reading in BIOS and the lower one in HWiNFO is actual what the board “sees” as PCH temp.

2018年7月25日 · (usb-c Ethernet download, which puts a heavy load on pch, while Steam try to store these data on ssd, which puts a heavy load on pch again) @BadHusband , thanks for the additional information. Your statement about the PCH hub temperatures being high due to it's usage with the USB-C adaptor is 100% correct.