In microelectronics, a dual in-line package (DIP or DIL) [1] is an electronic component package with a rectangular housing and two parallel rows of electrical connecting pins. The package may be through-hole mounted to a printed circuit board (PCB) or inserted in a socket.

The electronics industry has standardized package shapes and sizes (the leading standardisation body is JEDEC). The codes given in the chart below usually tell the length and width of the components in tenths of millimeters or hundredths of inches.

TI ships product in three basic configurations: stick magazine, tray, and tape and reel. The following paragraphs define each packing configuration. Stick magazine − The stick magazine (also called shipping tube) was developed in the early days of the integrated circuit (IC) industry.

Dimensions D and E1 do not include mold flash or protrusions. Mold flash or protrusions shall not exceed .010" per side. Dimensioning and tolerancing per ASME Y14.5M BSC: Basic Dimension. Theoretically exact value shown without tolerances.

QP Technologies (formerly Quik-Pak) offers leaded plastic packages in a variety of sizes and types, ensuring your ability to continue using these solutions for a range of applications from prototype to full production.

CIRTEK through hole package offerings are PDIP ( Plastic Dual-In-line Package ), SIP ( Single-In-line Package) and TO (Transistor Outline) in plastic and in metal can. CIRTEK PDIP lead count & body size as follows: 8L, 14L, 16L, 18L, 20L, 24L (300 mil PDIP) 24L, 28L, 40L (600 mil PDIP) Refer to the table below for various body sizes.

PDIP (PDIP Plastic Dual In-Line Package) is translated as a plastic dual in-line package, one of the forms of chip packaging. 1. DIP package. The popular in the 1970s was the dual in-line package, referred to as DIP (Dual In-line Package). DIP packaging structure has the following characteristics: 1. Suitable for PCB perforation installation; 2.

Title: Package Drawing - PDIP 28-Lead (Wide .600 Inch) 05-08-1520 Author: Linear Technology Corporation Keywords: Packaging Created Date: 7/25/2005 3:48:51 PM

Plastic Dual In-Line Packages (PDIP) are long-established industry standard through-hole packages. * Eutectic solder plating finish is 85% Sn/15% Pb. * High conductivity copper leadframe. * JEDEC standard compliant. * Parts packaged in anti-static 20" tubes. * Lead-free available with 100% Sn Matte alloy. * Pitch is 100 mils.

The Plastic Dual In-line Package, or PDIP, is one of the most mature plastic IC packages still in use today. It is rectangular in shape and has leads extending from both sides along its length, thus forming two sets of in-line pins. The PDIP comes in …