PTO简单来说，就是power take-off。 PTO模式，对于本项目来讲，就是主机在运行的时候，配套的轴发用来发电，然后电力与船舶电站并网，与两套发电机组共同供电。

A power take-off or power takeoff (PTO) is one of several methods for taking power from a power source, such as a running engine, and transmitting it to an application such as an attached implement or separate machine.

cal propulsion component may be used to Power-take-off generator (PTO, commonly known also as a Shaft Gene. ator) to work as a part of power plant. Part of the propulsion en-gines mechanical rotating power is transferred into the electr. cal network via gearbox and gen-erator. For frequency variations and voltage matching, complete drive cha.

2019年7月2日 · Power take-offs allow mobile crushing plants, road milling machines, and other equipment to transfer engine power to perform primary and auxiliary functions. A PTO is a device (a mechanism) usually seated on the flywheel housing, which transfers power from the engine to a secondary application.

2020年8月6日 · The Power Take Off (PTO) feature allows the operator to select three pre-programmed Engine speeds, and to adjust Engine speed with the use of cruise control switches in the cab or remotely.

PTI/PTO推进是最近发展起来的一种新型船舶推进方式，兼具传统柴油机推进和电力推进优点，可实现多种船舶工作模式，具有操控性好、安全、经济等特点，将是未来船舶推进方式发展方向之一。

轴带电机的使用不再仅局限于发电功能 (功率引出,即PTO模式),已经出现作为电动机来驱动推进器的工作模式 (功率引入,即PTI模式)。 介绍轴带电机PTI工作模式,尤其是验收和维护时须关注的事项。

up mode, the PTO is coupled directly to the engine. With the transmission in lockup, rapid engagement of a high inert load to the PTO output may result in engin

2021年8月15日 · The PTO Mode parameter determines the mode of operation. There are two modes of operation: Ramp Up/Ramp Down and Set/Resume. Use the CAT ET in order to change the value of the parameter.

通过参数 PTO_mode 可设置 PTO 接口的使用类型。 PTO 接口的使用方式。 仅当输出级处于未激活状态时才可更改设置。 更改的设置将在下次启用输出级时被采用。 固件版本为 ≥V01.04 时可用。 通过参数 ESIM_scale 可设置编码器模拟的分辨率。 编码器模拟的分辨率。 分辨率是每一次转动的增量数（带四倍分析的AB信号）。 在信号A和信号B处于High（高）的间隔中，每一次转动将生成一次标志脉冲。 仅当输出级处于未激活状态时才可更改设置。 更改的设置将在下次产品 …