2018年4月6日 · RTT, or round-trip time, is the time that it takes to send a message and receive the result from server. As I searched this, this seems to be the same as ping in network jargon.

2018年8月2日 · Very often, round-trip time is compared to the ping time between A and B. The ping time may provide a good value for the effective RTT but it might also be something else, due to potential routing and processing differences between the ICMP packets used by ping and those for the actually used protocol packets.

2010年4月24日 · Hi every body. I was reading about ping tool. When we ping an ip address, we also get RTT( round trip time). Let say we have two hosts, A and B. Let say we ping B from A and get the ping response with RTT 10 msec. Does this 10m sec also include processing time taken by Host B to processes ...

I’m attempting to estimate latency between my PC and any servers/clients it interacts with. I don’t want to use Ping for various reasons (requires both ends to allow it, would require additional traffic just to determine latency, etc) and would like to estimate …

2014年8月7日 · Posting RTT is figured by the sender recording when it sends the ping request and subtracts that from the time when it gets the ping reply. I.e. the delta is the RTT. Receivers might be slow to process a ping request, so the latency isn't always just network time, it often includes the receiver's processing latency.

2012年3月15日 · Hi guys, According to the below diagram, what might be causing the high RTT , where should i start the troubleshooting and which are the commands and checks i have to make in order to resolve this issue.

2014年6月17日 · Does increasing the bandwidth on a link from, let's say, 1mb to 30mb reduce the RTT? I have found one answer saying no. Can someone please explain? Also, what are the best mechanisms to reduce RTT?

2020年6月1日 · Is it possible to calculate available bandwidth using something like ping. In theory it is. If you send one minimum size packet and note its RTT and then send a larger (possible maximum size frame or packet), the RTT will increase due to the additional size. The time increase will reveal the bandwidth to transport the additional size frame/packet.

2006年3月2日 · Hi all, We are facing problem of high RTT on our ISP link. Wondering that it could be the policy restriction on ICMP rate configured on other side of border router, we want to know the RTT using other protocol than ICMP. Can we ping …

2021年9月22日 · You can use ping to measure RTT between you and an IP host and thereby confirm connectivity. Is there an equivalent that can be used on L2/Ethernet with MAC addresses?