The Pmod AMP2 is a low-power audio amplifier through the use of the Analog Devices SSM2377. With digital gain options and a pop-and-click feature, users are able to drive a variety of monophonic outputs by providing a digital or analog signal. Quickly find what you need to get started and reduce mean time to blink.

The Digilent PmodAMP2 (Revision A) amplifies low power audio signals to drive a monophonic output. This module offers a digital gain select to allow output at a 6 or 12 dB gain with pop-and-click suppression. Digilent Pmod IPs are only supported in …

Audio amplifier with left and right channel separation; Stereo output via two standard 1/8“ (0.32 cm) mono speaker jacks; Supports common I²S audio formats; Digitally configurable volume control for each channel; Dynamic range control; Stand …

The Pmod AMP3 uses a 2W Class-D audio power amplifier, the Analog Devices SSM2518. Users are able to provide stereo audio through either I²S or TDM at a variety of sampling frequencies. The I²C interface can be used to configure the digital volume and dynamic range control, although the Pmod may also be used in a stand-alone mode without the ...

The demo program continuously drives the Pmod AMP2 at regular time intervals with a triangle wave alternating between 440 (the A above middle C) and 587 (the D above middle C) Hertz. Be sure to connect a speaker or pair of headphones to the 3.5mm jack (J2) to …

5 天之前 · The Pmod AMP2 is a low-power audio amplifier using the Analog Devices SSM2377. With digital gain options and a pop-and-click feature, users can drive a variety of monophonic outputs by providing a digital or analog signal.

The Digilent PmodAMP3 features an Analog Devices® SSM2518 2 watt Class-D Audio Power Amplifier. The module enables the use of I2S audio protocol or TDM to produce stereo audio at various sampling frequencies. Users may configure the digital volume and dynamic range control via an I2C interface.

购买 410-233 - digilent - 接口模块, pmod™amp2, ssm2377无滤波器高效率单声道2.5 w d类音频放大器。e络盟中国 专属优惠、当天发货、快速交付、海量库存、数据手册和技术支持。

2018年3月6日 · Pmod接口是将外设与FPGA开发板进行组合和匹配的很好方式，可利用方便、可手工焊接的连接器连接八个引脚以及电源和地。 FPGA的灵活性允许将其八个信号引脚用于几乎所有功能。 尽管这提高了其对于FPGA的实用性，但也造成该接口难以配合那些外设功能分配给特定引脚的微控制器。 为解决这一问题，Digilent定义了多种不同的Pmod引脚排列类型，不同的功能分配给特定的引脚（图1）。 图1. Pmod引脚排列类型将不同的功能分配给特定引脚。 类型定义 …