The tables below present information on what Pmods and boards are supported by Pmod IPs, as well as additional design requirements for using each Pmod IP.

2020年10月28日 · Pmods are designed to plug directly into Pmod host ports that adhere to the Digilent Pmod Interface Specification. Additionally, the Digilent Pmod Standard lays out guidelines for form factor, communication protocols and access to a target audience through reference manuals, code examples, user guides, and technical support.

Pmod interface (peripheral module interface) is an open standard defined by Digilent in the Pmod Interface Specification [1] for connecting peripheral modules to FPGA and microcontroller development boards using 6 pins. Pmod or Pmods may …

The PMOD interface is a series of standardized digital interfaces for various digital communication protocols such as SPI, I2C, and UART. These interface types were standardized by Digilent, which is now a division of National Instruments. Complete …

The Pmod Standard is a guideline developed by Digilent Inc. to establish and create peripheral modules that earn the Pmod™ status. In short, this document will cover how the peripheral module will adhere to a communication protocol, the form factor that Pmods need to have, and the supporting documentation that needs to be present for each Pmod.

SUMMARY OF SIGNAL MAPPING BETWEEN ARDUINO AND PMOD Table 6 provides an overview of all signals originating from the Arduino shield to the Pmod connectors P13, P14, P15, and P16. Table 6. Signal Mapping Recap Between Arduino Uno and PMD-ARD-INT-LCZ Arduino Uno Shield (SDP-K1) SPI0-PMOD (P14) SPI1-PMOD (P15) SPI2/UART-PMOD (P16) I2C …

PMD-ARD-INTZ enables four Pmod modules to interface with EVAL-ADICUP3029 / EVAL-ADICUP360 development boards or any equivalent Arduino MCU boards. Out of the four Pmod ports, two is configured as SPI Pmod, one is I²C Pmod, the other one can be configured as either SPI or UART Pmod.

The following table shows the pin mapping for the Pmod 0 interface connector, J39.

The RH4Z2501-PMOD is a PMOD module for the RH4Z2501 Renesas silicon solution. The purpose of the module is to be used with a standard MCU evaluation board with a PMOD interface to implement an IO-Link

PMOD is a Digilent standard for FPGA dev board connections. Copyright © 2020 1BitSquared.