2018年7月24日 · Simply connect the various channels from the RC receiver to the digital input pins. RC receivers are 5 VDC and draw very little current, so it’s even possible to power the whole arrangement...

This library allow you to control RC-models via PC through standart transmitter. It is using trainer PPM input port to send commands from PC to transmitter. PPM signal is generating by sound card, so you don't need any microcontroller or any other device to generate PPM.

2010年8月31日 · Using a 1/8-to-1/8 3.5mm mono phone jack, you plug one end into your transmitter's trainer port, and plug the other end into your PC's microphone jack. The software maps the TX's signal received by the PC's sound card, similar to …

2021年3月6日 · The USB2PPM circuit gets the signal from PC over USB connection and converts it to Pulse-Position-Modulation (PPM) to be input e.g. over a trainer jack into a remote control transmitter. USB2PPM uses standard trainer port signal .

The RC-USB-Interface has some enhancements compared to the Gameport Interface: It can be used by modern notebooks equipped without gameport. supports USB 1.1, USB 2.0, Hot-Plugging and is powered by USB

The PCTx interface allows you to connect your R/C transmitter to your PC. By connecting an R/C transmitter to a PC via the PCTx interface, you now have the ability to take control of an R/C vehicle or robot with your PC side applications.

2022年8月7日 · You could use a USB port and some hardware but you will have to learn how to program a USB port. Most modules work either with a serial link or a PWM stream to tell the module what channel values to put out.

This project creates the possibility for everyone with nearly any type of Arduino to connect his or her favorite RC transmitter to a pc and play games with it. This eliminates the need for expensive external RC dongles.

PPM2USB is a simple circuit which decodes a PPM-Signal from a R/C (Radio Control) transmitter and emulates a USB-Joystick.

2020年4月8日 · Here I want to show you how to connect your RC receiver to your computer as a game controller input using the Teensy 3.6 as a USB HID input device.