The TechWest PX Type Plug is a positive blank off tool designed to be run into an X Type Profile Nipple, holding pressure from both above and below. The TechWest PXN Type Plug is a similar tool, designed to be run into an XN Type Bottom No …

The ‘P-PX’ Plug Assembly is run and pulled on wireline and is designed to plug the tubing for testing packer leakage, re- moving wellhead, testing tubing and separation zone during remedial work over. The plug assembly consists of a P-X, P-XN, P-R, P-RN Lock Mandrel, an Equalizing Sub, an Equalizing Valve and an Equalizing Cap.

A PX Equalizing Assembly is used to plug off the wellbore and in conjunction with X/XN lock assemblies. Description. The BT “P” Equalizing Assembly is made of 7 components: 1. Prong Mandrel 2. End Cap 3. Housing 4. Back Up Ring – Female 5. Back Up Ring – Double Male 6. Back Up Ring – Double Female 7. V-Packing. Operation

The PXN Plug is a device capable of holding pressure differentials from above or. below when set at any XN Profile Nipple of the same size. If you have an enquiry, please get in touch by completing your details below.

The PX Wireline Nipple is a selective landing nipple that allow for the location and installation of many flow control devices such as blanking plugs, bottom hole chokes etc. This nipple design has two locking grooves and a seal bore which allow for the internal locking of flow control devices.

Type PX Equalising Prong is used in conjunction with Type X Lock Mandrel to act as a plug to hold pressure from either above or below the well to perform replacement or repair work of surface equipment. The external fish neck on the prong allows easy retrieval and the prong body prevents sand from entering the lock and equalising sub.

When combining a Lock Mandrel assembly to an equalising housing and they will form a PX Plug. When Type PX Equalizing Prong is added to this tool,which is able to hold top & bottom well pressure set in a Landing Nipple. This allows repair or replacement work to be carried out while

PX Equalizing Prong is is a key component of wireline tools in oil and gas well operations, specifically designed to enhance well control and zonal isolation, this tool is used in conjunction with Type X Lock Mandrel to act as a plug to hold pressure from either above or below the well to perform replacement or repair work of surface equipment.

Equalizing Assembly is a key component in oil and gas well operations, specifically designed to enhance well control and zonal isolation. This assembly serves as a wellbore plug when inte-grated with X and XN Lock assemblies, strategically positioning itself within the completion tubing.

Bay D, 5516-40 St SE Calgary, Alberta, Canada, T2C 2A1. Tel: (403) 640-2124 Fax: (403) 236-3667 © 2017 TechWest Inc. All Rights Reserved. | Privacy Policy