The Type “TICPX” Plug is a positive plug used in conjunction with the Type “TICX” Landing Nipple. This plug might be used to test tubing or to plug tubing to perform repairs or replacement of surface equipment.

The TechWest PX Type Plug is a positive blank off tool designed to be run into an X Type Profile Nipple, holding pressure from both above and below. The TechWest PXN Type Plug is a similar tool, designed to be run into an XN Type Bottom No …

The B & T PX Plug is a positive plug used with a B & T X Lock. It can be used to test tubing or plug tubing for repairs or replacements. Pulling the Prong from the assembly achieves equalization. B & T PX PLUG

Used in intermittent gas lift wells to contain fluid in the tubing string during an injection cycle, or to set packers and test the tubing string. Equalizing standing valves, blanking plugs, and circulating plugs control flow in one or both directions in single or dual completions.

The PXN Wireline Nipple is a bottom no-go landing nipple that allow for the location and installation of many flow control devices such as blanking plugs, bottom hole chokes etc. This nipple design has two locking grooves and a seal bore which allow for …

Equalizing Assembly is a key component in oil and gas well operations, specifically designed to enhance well control and zonal isolation. This assembly serves as a wellbore plug when inte-grated with X and XN Lock assemblies, strategically positioning itself within the completion tubing.

The ‘P-PX’ Plug Assembly is run and pulled on wireline and is designed to plug the tubing for testing packer leakage, re- moving wellhead, testing tubing and separation zone during remedial work over. The plug assembly consists of a P-X, P-XN, P-R, P-RN Lock Mandrel, an Equalizing Sub, an Equalizing Valve and an Equalizing Cap.

The PXN Plug is a device capable of holding pressure differentials from above or. below when set at any XN Profile Nipple of the same size. If you have an enquiry, please get in touch by completing your details below.

The PX/PXN Equalizing Prong and Valve assembly, when attached to an X or XN Lock Mandrel Assembly, converts the lock mandrel to a plug, with equalizing device, capable of holding pressure differentials

The Type “TICPX” Plug is a positive plug used in conjunction with the Type “TICX” Landing Nipple. This plug might be used to test tubing or to plug tubing to perform repairs or replacement of surface equipment. Equalization is achieved by …