2025年1月9日 · For HONDA CR-V (RD1/RD2/RD3) 1997-01 ADJUSTABLE REAR TOE ARMS WITH SPHERICAL BEARINGS. Heavy Duty Steel Alloy Toe Arms And Spherical Bearings With Corrosion Resistant Finish.

Designed and manufactured by Godspeed Project, this kit will allow the proper alignment adjustments to improve stability at high speeds, under heavy braking, and during corners. Godspeed Project's toe arms are designed to be reliable for a daily driver yet strong enough for high performance race use. Features:

2024年12月27日 · These make it easy to adjust the rear toe of your vehicle. They look very nice and are beefy compared to the stock compensator arms. It took me a little time to get it perfectly set to zero toe at first, since I don't have proper alignment tools.

Coilover Shock Absorber & Toe Arms Kit; Independent Ride Height And Spring Tension Settings; High Rigidity 55CrSi Steel Cold-bent Springs; Anodized Shock Body With Anti-Corrosion Coating; Full 1 Year Limited Warranty From Date Of Purchase.

Yokomo YD2 Plastic suspension mount bushing for aluminum toe block [Yokomo] B8-301BSA

2024年4月13日 · 可以上铝螺丝和碳底减重，后轴就可以压RCPD底线900g，提供一种轻量化的选择。 舵机没有提供后置的选项有点可惜，雨刮转向节换个角度就可以后置了。 避震是软簧，50号油，避震不是非常顺，暂时不漏油，但是由于油稀，死区很小。 7500的差速油还有比较紧的o圈感觉像直轴了，不像是针对滑地的差速设置。 塑料件质感很好，新款摆臂精度高。 不过臂码精度不太好，球头有一半都是不顺的。 原装黑螺丝改款了很光滑，不过怕生锈换了。 前轮轴承要 …

2024年3月13日 · The RD2.0 can use the YD2ZX carbon upper deck as upgrade and there two aftermarket carbon lower decks for the RD2.0 I have seen now. For me, owning a fully loaded YD2-ZX, a Topline SX3 with ReveD & Yokomo option parts and light modded SX3, the RD 2.0 is a very simple and easy chassis that performs with little upgrades.

A new rear toe control system is now available that will dramatically improve the running performance of the YD-2S series! By installing a kingpin shaft on the rear hub carrier and connecting a linkage for toe control, it is possible to change the toe angle in response to suspension operation.

YOKOMO YD-2S REAR TOE CONTROL SYSTEM (Y2-RTCA) $156.00 YOKOMO YD-2S REAR TOE CONTROL SYSTEM (Y2-RTCA) Add to Cart Out of Stock

The MST MB Rear Suspension Kit is an all inclusive rear suspension conversion for the RMX2.0 that allows an increase in rear toe in and roll center tuning options. Package includes all the parts needed to convert the rear suspension and instructions. *42mm CVD SHAFTS ARE RECOMMENDED IF YOU WISH TO SET IT UP LIKE THE INSTRUCTIONS SAY.