2022年7月26日 · For a print that needs a large flat area print it flat on the build plate, do not raise it and add supports and a raft as the large horizontal area will adhere to the fep and almost certainly separate from the raft and supports as they have done in your photos. Any other angle will require a large amount of post sanding to get the base truly flat.

2023年7月25日 · To resin print flat surfaces and directly on the build plate, use a magnetic flex build plate, reduce the Bottom Exposure time, and hollow your model to reduce suction. You should also use the tolerance compensation setting and add a …

2023年11月11日 · Here 7 easy tips for printing flat surfaces with resin: Calculate print angle using flat surface formula. Adjust the print angle. Always tilt flat surfaces. Know how to print multiple flat areas. Print the flat surface directly on the plate. Fill in the stair steps. Keep the printer bed level.

2021年9月8日 · Proper print orientation is a huge deal in resin 3D printing. An adequately oriented resin print is far more likely to print successfully and work as intended than one printed flat, without any orientation. The simple answer to why resin prints are angled is that tilting reduces peel force and reduces layer lines on the model.

2021年11月28日 · It's possible to print it flat to bed, the biggest problem lies in ensuring pressure relief whilst printing. Resin slicer programs default to lifting the print 5mm from the bed, this can be changed in the support settings.

3D resin printing, tips, tricks and more 😊 Printing flat off the build plateTarot STLShttps://cults3d.com/en/3d-model/various/major-arkana-of-the-tarotPrevi...

2021年12月6日 · Can I just print the tray flat on the build plate or do I need to angle it? Also, are there any rules of thumb on hollowing and infill to save resin (density, pattern, etc.)?

In my case I’m printing tanks with lots of big flat surfaces and I need them to be as smooth as possible. So I discovered how to use trigonometry to calculate the best possible angle to use in...

2021年9月23日 · We are going to do two things: achieve the flattest possible surface we can and add texture, both of which promote print adhesion and lead to better resin 3D prints. Very flat surface - while a surface plate made of granite is one of the flattest pieces of equipment anyone could find, most will not have access to one.

2021年9月27日 · To fix resin 3D prints that are warping, you should make sure your models are properly supported with enough light, medium and heavy supports. Try increasing your normal exposure time so the cured plastic is hardened enough. You can use an optimal orientation to reduce warping in resin prints.