2014年7月31日 · The Cisco implementation of the Routing Information Protocol (RIP) Version 2 (RIPv2) supports authentication, key management, route summarization, classless interdomain routing (CIDR), and variable-length subnet masks (VLSMs).

2021年6月20日 · 本文详细介绍了如何配置Cisco路由器的动态路由协议RIP，包括线路连接、IP及封装设置、时钟速率调整和带宽分配。 通过背对背连接，使用WIC-2T模块和serialDCE线缆建立连接，并为每个接口配置IP地址、PPP封装和时钟速率。

2007年10月10日 · Route summarization reduces the amount of routing information in the routing tables. RIP Version 1 always uses automatic summarization. If you are using RIP Version 2, you can turn off automatic summarization by specifying the no auto-summary command. Disable automatic summarization if you must perform routing between disconnected subnets.

2024年1月29日 · RIP operates as a distance-vector routing protocol, which means that routers exchange routing information with their neighbors, and each router makes decisions based on the distance (metric) to reach a destination. The metric used by RIP is typically the hop count – the number of routers that must be traversed to reach a particular destination.

2025年3月18日 · RIP is the simplest and one of the oldest Distance Vector routing protocol. Learn how to enable and configure RIP routing in Cisco router with practical example in packet tracer. To explain RIP Routing, I will use packet tracer network simulator software.

2024年4月26日 · Routing Information Protocol (RIP) is an active routing protocol that operates hop count as a routing metric to find the most suitable route between the source and the destination network. It is a distance-vector routing protocol that has an AD value of 120 and works on the Network layer of the OSI model.

In this lesson, I’ll show you how to configure the RIP on a Cisco router. This is the topology that I will use: Above, we see three routers called R1, R2, and R3. There are a couple of networks, so we’ll have something to advertise in RIP. First, let’s configure all the interfaces: Before we continue RIP, we’ll check the routing tables:

2019年3月1日 · Cisco IOS, uses "router rip" command to enable RIP routing protocol. The version command is used to specify which RIP version to use (either 1 or 2). If the version command is omitted then the router defaults to sending RIPv1 but can receive both RIPv1 and RIPv2.

1 天前 · Authentication using keychain in Cisco IOS XR Routing Information Protocol (RIP) provides mechanism to authenticate all RIP protocol traffic on RIP interface, based keychain authentication. This mechanism uses the Cisco IOS XR security keychain infrastructure to store and retrieve secret keys and use it to authenticate in-bound and out-going ...

2024年10月16日 · RIP（Routing Information Protocol）是一种内部网关协议（IGP），主要用于小型或同质网络环境中，实现 路由器 之间的路由信息交换。 RIP基于距离矢量路由算法，通过跳数（hop count）来衡量到达目的地的成本，最常用的版本是RIPv2，它支持无类别域间路由（CIDR）和子网掩码。 RIP协议简单易配置，广泛应用于小型网络。 它使用固定的更新周期（通常为30秒）广播其路由表给相邻的路由器。 RIP协议的优点在于易于理解和实施，但它的缺点 …