RSRQ（Reference Signal Receiving Quality）表示LTE参考信号接收质量，这种度量主要是根据信号质量来对不同LTE候选小区进行排序。 这种测量用作切换和小区重选决定的输入。 RSRQ被定义为N*RSRP/ (LTE载波RSSI）之比，其中N是LTE载波RSSI测量带宽的资源块（RB）个数。 RSRQ实现了一种有效的方式报告信号强度和干扰相结合的效果。 反映和指示当前信道质量的信噪比和干扰水平。 为了使测量得到的RSRQ为负值，与RSRP保持一致，因此RSRP定义的是单 …

2021年4月8日 · RSRQ is Reference Signal Received Quality. This again only applies to 4G LTE networks and is a measure of the signal quality of a cellular connection. RSRQ is typically displayed in a range from 0dB (highest quality) to -20dB (lowest quality). Typically better signal quality results in a more reliable connection.

RSRP，Reference Singal Receiving Power，是指定测量频带上，承载小区专属参考信号的资源粒子的功率贡献（单位w）的线性平均值（协议规定RSRP指的是每RE的能量，但每个RE中都安插RS不可实现因此，只能算在RB中安插几个之后算均值），如下图所示。 简单的可以认为RSRP就是每个subcarrier的功率。 2，RSSI. RSSI，Reference Singal Strength Indicator，指的是接收带宽内的总功率，包括有用信号、干扰和底噪。 测量的参考点位UE的天线端口。 3，RSRQ. …

RSRQ is defined as (N x RSRP)/RSSI in 3GPP 36.214, where N is the number of RBs over the measurement bandwidth. As you see from the definition of RSSI, RSSI contains all sorts of power including power from co-channel serving & non-serving cells, adjacent channel interference, thermal noise, etc.

2025年2月5日 · RSRQ (Reference Signal Received Quality): Indicates quality of the received signal, and its range is typically -19.5dB(bad) to -3dB (good). Indicates how clean the signal is.

2022年6月6日 · 本文详细介绍了无线通信中的关键指标rsrp（参考信号接收功率）、rsrq（参考信号接收质量）、rssi（接收信号强度指示）和sinr（信号干扰噪声比）。rsrp衡量小区覆盖，rssi反映信号强度和干扰，rsrq是rsrp与rssi的比值，sinr则评估链路质量。

Cell signal quality: RSRQ. 4G LTE and 5G cell signal quality are measured by RSRQ (Reference Signal Received Quality) in decibels (dB). The greater the RSRQ value, the less interference the signal is getting from other cells operating at or near the same channel.

RSRP and RSRQ are key measures of signal level and quality for modern LTE networks. In cellular networks, when a mobile moves from cell to cell and performs cell selection/reselection and handover, it has to measure the signal strength/quality of the neighbor cells.

RSRQ:（ReferenceSignalReceivingQuality）表示LTE参考信号接收质量，这种度量 主要是根据信号质量来对不同LTE候选小区进行排序。这种测量用作切换和小区重选 决定的输入。 RSRQ被定义为N*RSRP/(LTE载波RSSI）之比，其中N是LTE载波RSSI测量带宽的资 源块（RB）个数 …

2021年5月28日 · RSRP, RSRQ and SINR are three important parameters used to measure the quality of a cellular network signal in LTE & 5G Technologies. RSRP refers to Reference-Signal-Receive-Power and measures the power of the reference signal received at …