2021年12月8日 · I had it tuned by my dad, we decided to put it on the mustang dyno at my job's shop. It ended up making surprising numbers for the mods it has. 215whp may seem low but since this is a mustang dynamometer, it tends to read 12-15% lower than your typical DynoJet. If you take these wheel numbers and convert them by only 12% that is 241whp and 211wtq.

2009年10月15日 · Kraftwerks graphs always look like they want more RPM because boost obviously climbs with RPM (since the s/c is belt-driven). Loi's K24 EG revs to 9500 rpm and his graph looks the same...builds power right to the rev limiter.

2010年7月13日 · This DIY is being done on a 07 K24A2 motor in a 2006 RSX Type-S. The head was modified originally to house a JRSC manifold normally fitted for the K20 head so the below DIY will cover mods needed to fit a K20 head.

2009年3月10日 · So, that being said, here are the results from my dyno session. I will let you decide if you think there is value in this technology... -K24A4 block with TSX rods and pistons. -Type-S oil pump. -K20A head with Z3 springs, Z1 intake cam and A2 exhaust cam. -Bosch 725cc injectors. -3.0" blower drive pulley.

2010年9月23日 · Great numbers I should be dropping my rebuilt k24a2 into my RSX here shortly but I am running OEM cams so my numbers won't be as good as yours. RSX for life!! LOL

2014年5月18日 · Several people have posted similar builds (built block, stock cams) and made 270+ on a dynojet. HYBRIDRACING American. Made. Quality. It's a conservative tune since its a DD on 91 octane and 93 degrees ambient temp during dyno.

Everything you need to know before dyno tuning your Honda K-Series. 1. The Biggest Bank For The Buck. The best bang for the buck modifications on a naturally aspirated k series are RBC intake manifold, 3 inch cold air intake, race header, and 3 inch exhaust.

2011年7月18日 · Yes the k24 can fit into any RSX. All RSX's use the k20 engine. Both the k24 & the k20 have the same engine mounts. The only thing you'll need to do is use the k24's cross beam. k24 are a bit taller than the k20. If you don't use the cross beam from k24 ... then you can't close the hood properly on the RSX.

2010年8月28日 · Awesome numbers! I have a simular build ... only I have Crower stage 2 3/4 cams and 2009 TSX pistons in my K24 and a Toda header. Last dyno run was only to 6950rpms cause it was just to see some base numbers and there was only 400kms on the motor. But at 6950rpms I made 253whp and 200ft/lbs STD, and 247whp and 196ft/lbs SAE ... I love the K24 ...

In todays video we are going to be tuning the boosted rsx.