Accelerated Exposure of Automotive Exterior Materials Using a Controlled Irradiance Water-Cooled Xenon Arc Apparatus (Cancelled Jan 2008, Superseded by J2527_201709) J1960_200801.

Southfield巴斯夫是 IS0 17025认证实验室，此认证包括符合SAE J1960和J2527标准的要求。 样品暴露总周期为2 500 KJ，每隔500 KJ对颜色和光泽进行评估。 结果显示，对于大多数材料，平板式和转鼓式设备给出了可比较的结果，如图9和图10所示。

2025年3月12日 · SAE J1960-2008的标准全文信息,本测试方法规定了用于各种汽车外部材料加速暴露的受控辐照度@水冷氙弧装置的操作程序。 本标准仅限于仪器部分规定的氙弧试验装置型号。 所有其他型号的氙弧测试仪必须使用 SAE J2527 来执行 SAE J1960 中指定的测试条件。 SAE J2527是基于SAE J1960测试参.

Scope This test method specifies the operating procedures for a controlled irradiance, water-cooled xenon arc apparatus used for the accelerated exposure of various automotive exterior materials. This standard is limited to the models of xenon arc test apparatus specified in the Section on Apparatus.

2008年1月11日 · SAE J2527是基于SAE J1960测试参数的性能标准。 使用氙弧试验设备执行SAE J2527必须得到合同双方的同意。 This test method specifies the operating procedures for a controlled irradiance, water-cooled xenon arc apparatus used for the accelerated exposure of various automotive exterior materials.

2008年1月11日 · Find the most up-to-date version of J1960_200801 at GlobalSpec.

1.1 Scope This test method specifies the operating procedures for a controlled irradiance, water cooled xenon arc apparatus used for the accelerated exposure of various automotive materials. The sample preparation, test durations, and performance evaluation procedures are covered in material specifications of the different automotive manufacturers.

2008年1月11日 · Also Known As: SAE J1960_200801 SKU 135459527 Published by SAE International, formerly Society of Automotive Engineers SAE Publication Date 2008-01-11 Pages Count Pages 15 This test method specifies the operating procedures for a controlled irradiance, water-cooled xenon arc apparatus used for the accelerated exposure of various automotive ...

SAE J1960是关于《使用可控辐照度的水冷氙灯装置对汽车外饰件进行加速曝晒》的测试方法。 在SAE J1960中曝晒条件如下. 在光照循环中，辐照度控制在 0.55 W/m 2 /nm @ 340 nm ; 紫外延展过滤器 ( quartz 内过滤器/ borosilicate 外过滤器或 Q-Lab 的 Q/B 过滤器);

This test method specifies the operating procedures for a controlled irradiance, water cooled xenon arc apparatus used for the accelerated exposure of various automotive materials.