Table U18 — Port Detail — SAE J1926-1 (ISO 11926-1) 1) Nominal tube OD is shown for the standard inch sizes and the conversion to equivalent millimeter sizes. Figures are for reference only, as any boss can be used for a tubing size depending upon other design criteria. 2) See SAE J846 for more information.

For complete specifications refer to SAE Standards J1926-1 for straight thread ports and J518 Parts 1 and 2 for 4-bolt flange ports. **NOT AN SAE STANDARD. INSERTATM PRODUCTS, I STANDARD.

Tap drill depths given require use of bottoming taps to produce the specified full thread lengths. Where standard taps are used, the tap drill depths must be increased accordingly. Nominal tubing OD is shown for the standard in sizes. Figures are for reference only, as any boss can be used for a tubing size depending upon other design criteria.

SAE information is provided as an aid to designers. For complete specifications refer to SAE Standards J1926 for straight thread ports and J518 JUN93 for 4-Bolt flange ports. SIZE CODE

2020年5月14日 · Use SAE J1926-1 as the key for port design, read it, understand it, know with confidence the port you are designing is correct. Checklist for fluid systems with SAE J1926 ports. Designing a port incorrectly can cause issues for years to come. Use this list as your checklist in the SAE J1926 port design process: Use SAE J1926-1 for all port ...

SAE J1926-1 is SAE Straight Thread O-ring Port Conforms to MS16142. Does NOT conform to MS33649 (8). ISO 11926-1 is Connections for general use and fluid power — Ports and stud ends with ISO 725 threads and O-ring sealing — Part 1: Ports with O-ring seal in truncated housing. SAE J1926-1 is the same to ISO 11926-1 standard. Same places as ...

O-ring Boss ports (ORB) provide a seal by trapping the fitting’s O-ring inside a port cavity. When a fitting is installed into the port, the O-ring is trapped between the fitting body hex or washer and port cavity.

SAE and NPT Pipe and Port Sizes SAE Dash Size Thread Decimal 2 5/16-24 0.313 3 3/8-24 0.375 4 7/16-20 0.438 5 1/2-20 0.500 6 9/16-18 0.563 8 3/4-16 0.750

2016年9月9日 · This part of SAE J1926 specifies dimensions for fluid power and general use ports with inch threads in accordance with ASME B1.1 for use with adjustable and nonadjustable stud ends shown in SAE J1926-2 and SAE J1926-3.

PORT DIMENSIONS FITTING DIMENSIONS SAE O-RING PORT DIMENSIONS E C D F B T A C D Go 45o FLUID POWER DATA SAE O’RING PORT DIMENSIONS. Title: Fluid Power Data.qxd Author: Scott Vairin Created Date: