Side face reinforcement (SFR) is designed for beams even though the depth is less than 750mm, whether there are any options to enable/ disable side face reinforcement? In RCDC, SFR is calculated as per design requirements including torsion.

2016年4月1日 · The primary objective of this study was to develop a new type of high-performance lightweight beam with improved performance over conventional reinforced concrete (RC) by adding fibre-reinforced polymer (FRP) reinforcing rebar to ultra-high-performance concrete with microfibre reinforcement (UHPC-SFR).

ACI 318 code [6] provides Side-face reinforcement (SFR) when beam depth is greater than 915 mm, it should be uniformly distributed on both side-faces of the beam over a distance of half the beam depth from the tension face.

2025年3月14日 · The SFR rebar calculation is same however, that inner rebar is not provided. if you want 2 rebars in RCDC, please change the minimum rebar for SFR to 10mm. Using 10mm rebar, RCDC does provides the 2 rebars.

[[Side face reinforcement (SFR) is designed for beams even though the depth is less than 750mm, whether there are any options to enable/ disable side face reinforcement?]] [[Please give clarification of failure type for beam element.

2015年1月1日 · The primary objective of this research was to develop a new type of high-performance lightweight beam providing better performance than conventional beams made of timber, steel or reinforced concrete (RC) by casting fibre-reinforced polymer (FRP) reinforcing bars (rebars) in ultra-high-performance concrete with short fibre reinforcement (UHPC ...

2016年10月15日 · The conducted experimental work confirms the feasibility of SFR-UHPC for I-shaped reinforced concrete beams and replacing classical stirrups by fibre reinforced concrete, with or without the combination of a single diagonal rebar as additional shear link.

2018年9月12日 · For beams exceeding the depth of 750 mm Side Face Reinforcement is provided to ensure lateral stability as well as confinement to increase the ductility of the beam member. Moreover, this additional side face reinforcement which is not included in load sharing mechanism also helps in dissipation of additional forces.

2019年8月1日 · Abstract- Side-face reinforcement (SFR) is well recognized in standard codes to control cracking in large reinforced concrete beams (RC-beams). Meanwhile, its...

In addition to these parameters, researches acknowledge the significant contribution of side-face reinforcement (SFR) in shear strength of RC-beams. This paper aims at proposing a new model for...