The platform comprises 4 of our open source design SFX-100 linear actuators, an Arduino with our supplied firmware, all controlled by our SimFeedback software. You get a fast, highly reactive motion platform along with output for tactile effects via a sound card.

An unofficial in-depth guide to setting up and using SimFeedback to drive your SFX-100 actuators. From initial configuration through to tuning individual effects. 3d Printed SimFeedback controller box

The SFX-100 is a DIY motion simulator platform for sim-racing. It gives the ordinary gamer an opportunity to build a motion platform for a fraction of the cost of commercially available equivalents.

2019年3月22日 · About the SFX Platform . How does it work; The SFX-100 Actuator; Power consumption; Important items to understand; Safety Caution; Licensing. Actuators; SimFeedback; Plugins

This SFX platform is intended for DIY home builders only. The documentation, images and .STL (3D printing) files – These are open source and governed according to the creative commons license below and are not for commercial use.

2017年4月12日 · The SFX-100 actuators are limited to 100mm of stroke with the commonly used Simfeedback software. The physical design allows for a 110mm stroke if desired. Thano's controller lets you set this as an option.

2009年3月5日 · The SFX-100 is an open source actuator design and part of a DIY project that will allow you to build your own motion rig with out of the shelf and 3d printed parts. Here is the official website/blog

An unofficial in-depth guide to setting up and using SimFeedback to drive your SFX-100 actuators. From initial configuration through to tuning individual effects. 3d Printed SimFeedback controller box

2019年1月9日 · SFX-100 is 3dof, generally best suited for road surface and suspension simulation while NLRv3 is 2dof seat mover well suited for g-forces simulation. Combining them together allows both system to focus (with help of right config) on what they do best and to complement each other.

2018年12月9日 · Essentially a DIY linear actuator design, with software (SimFeedback) and an Arduino firmware package to drive 4 actuators in a platform mover design. The actuators are a combination of a Servo Drive, mounted to Ball Screws with a …