The page for seam settings is as follows, where Seam position, Seam gap, Wipe speed, and Role base wipe speed can be applied to all types of seams. The remaining settings belong to Scarf seams, which will be introduced in a separate section in the following text.

2024年3月6日 · What are the optimal settings for scarf seams? This is about the best write up as of right now that actually is based on testing. So it seems the ideal Scarf settings are as follows (pulled direct from the project file) and I tested these and can confirm the results are really good.

A Seam Gap in OrcaSlicer reduces the visibility of a seam line or any potential bumps by shortening the layered loop. It ends the layered loop slightly before its actual endpoint and prevents overlapping layers.

2024年6月7日 · Orca Slicer has been gaining popularity thanks to its advanced tools. Read on to discover how to get seams right with it!

Seam Gap: Controls the gap in mm or as a percentage of the nozzle size between the two ends of a loop starting and ending with a seam. A larger gap will reduce the bulging seen at the seam. A smaller gap reduces the visual appearance of a seam. For a well-tuned printer with pressure advance, a value of 0-15% is typically optimal.

2024年3月4日 · Use outer wall speed and acceleration instead of travel speed and acceleration. Added an option to disable this feature. Extra length on restart.

2023年2月14日 · I’m getting a beautiful seam with a 15% gap. Only if pressure/linear advance is off, the seam is looking bad. You do have the ability to change your print settings and minimize the seam to the point where it’s virtually invisible. Provided flow and linear advance are properly calibrated, is the seam gap the only setting I might want to change?

2024年3月4日 · This is just a place to discuss how to use scarf seam joints, the handful of settings that affect scarf seam joint quality and any issues found with this new and innovative seam type. Here is the original discussion, for reference: Seam: use scarf joint to minimize seam visiblity

2025年1月7日 · After a lot of trial and error, I got some improved overhang performance on the scarfs. I actually struggled to get a good picture of it. The key thing I found is that on overhangs the scarfs curl badly, so I slowed down the print on the scarfs until things stopped improving and set to alternate wall directions, then just tuned in everything else.

Introducing seam position settings and seam painting to help you achieve better print quality. The seam is a kind of gap between the start point and the end point of each perimeter of the layer.