Go to Wireless > Wireless Settings to set a new SSID. Go to Wireless > Wireless Security to set a new Wi-Fi password. Go to System Tools > Reboot to restart the extender.

The extender, or TL-WPA4220, or device mentioned in this User Guide stands for TL-WPA4220 AV600 Powerline Wi-Fi Extender without any explanations. Parameters provided in the pictures are just references for setting up the product.

View and Download TP-Link TL-WPA4220 quick installation manual online. 300Mbps AV500/AV200 WiFi Powerline Extender. TL-WPA4220 extender pdf manual download. Also for: Tl-wpa2220.

View and Download TP-Link TL-WPA4220 user manual online. 300Mbps AV500 WiFi Powerline Extender; 300Mbps AV200 WiFi Powerline Extender. TL-WPA4220 extender pdf manual download. Also for: Tl-wpa2220, Tl-wpa281.

2022年11月16日 · Copy SSID and password from your router via WPS to create one unified Wi-Fi network throughout your home. Note: If your router doesn’t have a WPS button, manually change the extender’s Wi-Fi settings via the tpPLC app, tpPLC Utility, or web interface. 1 Plug in the extender in the same room as your router.

It contains the following sections: • To Set Up a New Secure Wireless Network • To Extend the Existing Wireless Network... 2. Plug the powerline adapter into a wall socket. 3. Plug the powerline extender into a wall socket near the adapter. Powerline Extender TL-WPA4220 Powerline Adapter (For demonstration only) r l i n Router 4.

How to configure the TP-Link Powerline Extender to your Wi-Fi network will demonstrate how to set up a TP-Link Powerline Extender in your home using two methods: a. Copy Wi-Fi settings from router to extender b. Configure Wi-Fi settings manually

Set your extender(s) settings to your router’s wireless network name and password.

2011年1月10日 · How to find the hardware version on a TP-Link device; Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product. To avoid wireless disconnect issue during firmware upgrade process, it's recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.

More: To add additional Wi-Fi powerline device (TL-WPA4220 or others), use the same setup procedure as the TL-WPA4220. Wait until the powerline LED turns on. 4 Enjoy! Set your extender(s) settings to your router’s wireless network name and password. Plug in your extender next to your router (with WPS enabled). Press the WPS button.