2021年7月14日 · The front fender often rubs against the frame. Just use extra washers on the rear bolt mounts. Sherco issued a service bulletin about this in 2020 so I assume it was fixed in 2021. 2T CARB CLEARANCE Up until the 2020 models, the bottom of the two stroke carbs was often resting against the engine case. As long as it's not wearing through the ...

2024年10月17日 · Starter is way better on the Sherco. The KTM is a very light duty starter motor. The 150 KTMs around here have been very unreliable. Fouling plugs like crazy. I dont know anyone that bought one and was happy with it. I had one Sherco 125 that had a bad CDI new but it was figured out fairly quickly and under warranty for full disclosure.

2020年11月15日 · Hubs are Sherco style with two drive side bearings but not any better in terms of reliable. I found seals on the bearings including linkage tends to seep water in vs. other brands. Easy fix because you will replace shortly. Finish can go either way as I seen some poorly fitted items on all brands. OP, Sherco's 2t motors are among the best out ...

2024年12月18日 · I bought a used 2021 Sherco 300SEF, that only had 17 hours on it and looked like brand new. It seemed OK during a quick test ride around the PO's house. On my first trail ride with the bike, I noticed the clutch occasionally slipping a bit. I loosened up the lever on the hydraulic clutch, to make sure it is NOT holding the pressure plate out at ...

2022年4月17日 · I need some backup plugs for my 2022 Sherco SE 300 Factory. Have yet to foul one, but better safe than sorry and I cannot find the spare the dealer gave me ? OEM is BR7ES. I seem to recall mentions that there are better plug choices but cannot seem to find the posts. Not sure I need anything different but figured I’d ask before placing an order.

2021年5月25日 · I believe it's the same stroke as the Sherco 450 with a bit bigger bore resulting in I think a 468, not the 510 of the KTM. I honestly think it may outrun the 500 KTM. If you've ridden the orange 500 the Sherco rides much lighter, quicker on the throttle and feels a bit smaller. If you want bottom end to loft logs and such you won't be ...

2023年12月29日 · I called the local Sherco dealer. He said do not touch the TPS unless you can hook the bike up. He said the 2022 and 2023 my bikes often needed the butterfly valve adjusted as they would die when letting off the throttle. And with the throttle body I just bought being a "new" design (new part number) it might also need a tweak on the valve.

2023年9月13日 · The Sherco runs a leaf mid doesn't it? For hard enduro go back to a spring setup, it's much more compliant, especially for slow/small stuff. Edited September 14, 2023 by DEATH_INC.

2023年1月30日 · After many attempts to fix the issue Sherco provided me with a different bike, same model ect and I have not had any problems with this bike, it fact I love it. My issues started the day I got the original bike home. The dealer in Tucson tried several new rad caps and supposedly checked for a head gasket leak.

2023年2月15日 · We are doing some setup work on these bikes. There happens to be no High speed compression spring in the shock adjuster. We are going to test one of our Compression adjusters that we use for the Sachs shocks. I have some spare parts out of a YZ KYB shock that we can fit a high speed spring to add...