Unscrew screw "2" and remove oil pressure regulating valve "N428". Installation in reverse order. Note: Replace the sealing ring. Install the poly V-belt. Check the oil level. Oil level is normal. Engine oil temperature is about 80°C. Remove oil pressure sensor "F1". Connect pressure gauge "V.A.G 1342" to the hole for the oil pressure sensor "F1".

View and Download Skoda Octavia III 2013 workshop manual online. Octavia III 2013 automobile pdf manual download. Also for: Octavia iii 2014.

2024年3月27日 · The obvious answer is that its job is to regulate the oil pressure and I believe that this is critical, ok, but the thing is that it is not generating a check engine warning light on the dashboard. Instead the fault is only stored in ECU and cannot be cleared. I’m using an OBDELEVEN scan tool.

懂车帝用户专业奥迪维修发布了一条小视频，视频内容为：奥迪q5l报机油压力调节阀电器故障（更换n428） 搜索 业务合作 小程序 下载App 发布作品 登录

2017年9月19日 · Guess those three SSP linked below could clarify to you the oil system on your Gen2/Stage two engine EA888. Either N428 valve or its connection to ECU, connections to both oil pressure sensors or oil pump itself. Hope for no major damage inside engine happend, camshaft bearings and bracket, balancing shafts ...

– Collect any engine oil which flows out with a cloth. – Remove screw -3- and remove oil pressure control valve - N428- -1-. Page 175 Karoq 2018 1,5/110 kW TSI EVO Engine - Edition 07.2017 – Disconnect connectors -1- and -3-. – Remove and move clear the electric wiring loom -arrow-. – Collect any engine oil which flows out with a cloth.

1.6TDI EA288 oil pressure regulating control valve N428 location

2019年9月29日 · Three pressure switches on the wiring diagram, F22 F378 and F447, plus a pressure regulating valve, N428, in the oil pump. That could take some fault finding...

2023年7月24日 · N428 oil pressure control valve has a 2-pin plug. 12v on pin 2 (yellow/red), ECM controlled ground on pin 1 (brown/gray). This 12v is from the same fuse as for a lot of devices on the engine, so you'd have a lot of errors if it was the fuse.

Article «Removing and installing oil pressure control valve -N428-» from the section «Petrol engines 1.8/2.0 l / Engine repair» from the car repair manual «Skoda Octavia 3» 2013-2019 years of release.