2019年12月18日 · The filler color has to be as close as possible to the final stained wood color. There are wax- and sharpie-type pens and I have a few but frankly they never work for me. You can buy them in a set of 3-6 wood colors for around $10 and your can give it a try. You'll probably be more successful with actual paint.

2007年11月24日 · making a stainable wood filler/putty Hide glue is the key. Hide glue can be stained. For convenience, Minwax has a liquid hide glue. Mix that with your saw dust to make a thick putty/filler that is stainable. Keep in mind that hide glue is s slow drying glue.

2018年9月7日 · I used a certain wood filler marketed as "stainable" to fill in holes and carvings. After letting it dry thoroughly over many days and sanding down smooth, I stained it over the weekend - disaster. The areas with the filler did not stain and are a grey color. The rest of the desk is dark brown (Jacobean) and really shiny which I don't like.

2015年6月16日 · Assuming the problem is the stainable wood filler didn't take the stain all you have to do is color the filler with touch up markers and graining pens. You can get a set of three touch up markers at walmart which is light medium and dark. Graining pens you will have to get from a furniture finish supplier.

2010年10月3日 · What can I do if my wood filler begins to dries out? If there is a crust on your wood filler, remove it first and just add a small amount of water to your filler and mix it thoroughly. Repeat this process until you get it to a workable consistency. Be sure not to add too much because that can ruin your wood filler. About ¾ of the way down the ...

Using a cloth, work the filler into the wood in a circular motion. Unlike the linseed oil/pumice filler, this water-based filler dries very quickly, so you will have to work in one small area at a time. After you’re done, let the wood sit until the surface feels dry. Wipe off some of the excess with a damp cloth. Let the board dry over-

2010年10月18日 · Ideally, I’d like to remove the handles on them and just have the doors flush with no handle. However, everything I’ve read seems to infer that the any of the ~stainable~ products on the market is not that great. Which leaves me with a couple of options.. – Leave handles alone. Remove handles. Whitewash the wood and install handles back.

2014年10月16日 · stainable wood filler. Jump to Latest 21 - 30 of 30 Posts. 1 2. J. Jbeezy13 ...

2009年3月12日 · I need a good wood filler for (1) general use, filling holes, including furniture repair, and (2) to fill the gaps in a oak floor (the largest gap is 1/8″). In both cases there would be a finish applied atop the filler. [This question is NOT about grain fillers.] Rockler shows great review for both Famowood & Wunderfil.

2005年12月13日 · The easiest way to get a good match is to use a filler crayon to fill the holes after you have completely finished the piece. Minwax and a few other companies make them. Sawdust and glue won't look anything like the surrounding wood and won't absorb the finish the same way. John W.