XRD patterns of 316L stainless steel and as-welded sample are shown in Fig. 1. In Fig. 1 (a), there are numerous sharp peaks that correspond to the XRD pattern of austenite.

2020年5月11日 · X-ray diffraction has been applied in the investigation of phase formation in steels, operating in industrial environments. In this work, identification and quantification of …

XRD patterns of the smooth surface, laser-machined surface and StruCoat surface of 316 L stainless steel are shown in Fig. 5. In Fig. 5 (a), there are three sharp diffraction peaks...

The X-Ray diffraction (XRD), scanning electron microscopy (SEM), and FTIR were used for structural, and morphological analysis of the nickel oxide. Here, we observed the cubic...

2011年6月1日 · This study aims to apply profile analysis of XRD to cold rolled Type 304 steel as a dual phase (γ/α′) alloy and to quantitatively evaluate the change in dislocation density and …

20 小时之前 · The compositional breakdown of the M42 steel is detailed in Table 1. Figure 1 displays the XRD spectrum, revealing a typical body-centered cubic (BCC) α-Fe phase …

2022年11月28日 · The fraction of α’-martensite on fracture surfaces of ten commercial austenitic stainless steels of different austenite stability was measured by quantitative x-ray diffraction …

Applications for X-ray diffraction (XRD) in the iron and steel industry are widely spread. During the whole production chain, from the mining of the iron ore till the quality control of steel, XRD …

XRD Analysis X-ray Diffraction (XRD) is a powerful nondestructive technique for characterizing crystalline materials. It provides information on structures, phases, preferred crystal …

X-ray diffraction (XRD) and electron backscatter diffraction (EBSD) are the most commonly used diffraction techniques in industrial environments. Therefore, we will concentrate on XRD and …