SYLGARD™ 184 Silicone Elastomer Kit | Dow Inc.
What is SYLGARD™ 184 Silicone Elastomer Kit? Two-part, clear, 10:1, RT and heat cure, good strength, UL and Mil Spec, same as SYLGARD™ 182 but with faster RT cure. A two-part, 1 to 1 mix ratio dielectric gel that is suitable for sealing and protecting various electronic devices, especially those with delicate components.
Sylgard 184 10 g clip-pack Curing agent - MilliporeSigma
SYLGARD ® 184 is a silicone based elastomeric kit that is a two component system with a polymeric base and a curing agent which cross-links with the polymeric matrix. The resulting composite formed is a polydimethylsiloxane (PDMS) with tensile strength (UTS) of ~5.2 MPa and shore hardness of ~44 at room temperature.
Dow SYLGARD™ 184 Silicone Encapsulant Clear 0.5 kg Kit
Dow SYLGARD™ 184 Silicone Elastomer Clear is a two component, room temperature and heat curing encapsulant that is used as protective coating for LED lighting, power supplies, transformers, sensors, amplifiers, and connectors.
When liquid components are thoroughly mixed, the mixture cures to a flexible elastomer, which is well suited for the protection of electrical/PCB system assembly applications. Dow silicone encapsulants cure without exotherm at a constant rate regardless of sectional thickness or degree of confinement.
Sylgard 184 - wpiinc.com
Sylgard 184 silicone elastomer offers a flexible cure schedule from 25-150°C (77-302°F), without an exotherm. Sylgard 194 silicone elastomer requires no post cure and can be placed in service immediately following the completion of the cure schedule at an operating temperature from …
Dow SYLGARD™ 184 Silicone Encapsulant Clear 19.9 kg Kit
Dow SYLGARD™ 184 Silicone Elastomer Clear is a two component, room temperature and heat curing, encapsulant that is used as protective coating for LED lighting, power supplies, transformers, sensors, amplifiers, and connectors.
Silicone elastomer, Sylgard™ 184 Clear Kit, Krayden - VWR
Dow Corning Sylgard 184 is a flowable, two-component, transparent encapsulant with good dielectric properties and flame resistance. The silicone elastomer can be cured using either a heat or room temperature cure and does not require a post cure.
SylgardTM 184 can be used for many applications, a few of which are: encapsulation of amplifiers, coils, connectors, coils, equipment modules, circuit boards, transformers, solar cells, and ferrite cores. Great when optical transparency is needed.
SYLGARD 184 Silicone Elastomer Kit 44LB | Essex Brownell
SYLGARD 184 Silicone Elastomer Kit 1.1LB (0.5KG), a dynamic two-part solution offering clarity and versatility, and features a 10:1 ratio for precise mixing, facilitating both room temperature and heat cures to accommodate diverse project needs.
SYLGARD™ 184 Silicone Elastomer FEATURES & BENEFITS • Flowable • Room temperature and heat cure