2024年11月20日 · In essence, the TMAG is a PMAG. Many shooters have tested millions of PMAGs over the years with great success. You should be able to count on the same PMAG …

2024年7月31日 · I have never had a single mapgul product ever fail on me and I’ve used a wide variety. The entire reason why they took so long to even tease this was that apparently the process of creating this translucent polymer weakens the hell out of it.

2017年12月16日 · I have tried to recalibrate compass at different location without success. Shutting of the external compass eliminates the error "Mag sensors inconsistent". Also raising the COM_ARM_MAG value to 0.20 from 0.15 seems to eliminate the problem but then "EKF high imu accel bias" pops up instead.

2021年6月2日 · Why new FW can’t work properly any more with my setup? Logs of good and bad flight attached. Good FW was also 4.1 latest but nine month old built. This quad does have a big metal Li Ion battery, but mag is placed on the mast about 20-25cm away from it.

2024年1月15日 · A magazine that had the same outside dimensions and feed lip dimension as a regular stanag steel mag. Other platforms than the ar15 can have difficulty when using a pmag Gen 1 or 2.

2024年4月19日 · They were super lightweight, often 1/3 or 1/2 the weight of an equivalent AK mag, and lacked reinforcements so if they got dropped they'd deform and cause feeding issues.

2024年1月15日 · The new TMAG is STANAG-compatible and allow shooters to visibly verify various ammunition types as well as round count. Externally, ribbed front and rear straps provide a textured surface to securely grip the TMAG during magazine changes, yet the sides are left smooth to ensure visibility.

2021年2月9日 · I noticed that the message jumps for each failsafe of the mag (checking “sensors status” in mavlink console). The mag is external, connected with UAVCAN and I’m using PX4 v1.11.2, all internal mags disabled.

2022年7月31日 · Check the simple things first which is usually a mag post not getting good contact, loose mag connection wire at the coil box or the ignition switch. Do a quick temporary cleaning of the ignition switch by turning the key back and forth several times before you start it again and then turn to mag after it’s started on battery.

2018年7月13日 · If the one and only mag is faulty (either timed out or provides measurements which are repeatedly rejected), detect it and either refuse arming in position modes or go to failsafe if already armed.