2009年2月27日 · These transmissions were used in other trucks besides Jeeps. On the farm we had the four speeds with pto to drive the hydraulics to raise the beds on the grain trucks. Same for dump trucks, and wreckers, etc. The Cj2a's and 3a's used the pto off of the rear of the Spicer 18 transfer case to drive many accessories, including pto drive winches.

2015年2月15日 · The last one I purchased for a Ford T18 was Built by Muncie, they do have a web page. Try this phone (800) 367-7867. Chelsea pto; a single speed pto with a 26 tooth helical cut gear that originated from a 68 t-18 trans.

2018年5月7日 · The side number is T18-1, and PTO on passenger side, which suggests it is an early Ford T18 with a granny low. The tag was on the top cover from the factory. BagusJeep lives in Bali with far too many 4x4s:

2012年4月2日 · I am in the process of getting a new drivetrain put together for my Jeep. I picked up a T18 from a guy and it currently has a PTO shaft hooked up to the trans. I would like to just replace this with a cover but I am having some difficulty finding an affordable one. The only one I …

2006年3月16日 · the T18 has a PTO port on the passenger side of the case. i don't know what the last year was that the T18 was used, but i believe that it was still an option on CJs into at least the early 1980s. also, you could look for a jeep that someone has done a tranny swap on and put in a GM 4-speed such as an SM420 or SM465.

2017年3月23日 · Also, I see the PTO port is on the passenger side. My CJ T18 has the PTO on the driver side. Not sure if all Jeep T18s are this way. I think my reverse switch is also on the opposite side. Not sure if this is a Ford/Jeep thing or older/newer top cover difference.

2014年2月28日 · Yes. It's a jeep t18. Pto is on drivers side. Also bolt pattern matches jeep not ford. Pulling at exactly 1930 on Friday. Can't wait. Replacing gaskets and seals and painting with POR 15 orange throughout the rear of the week. Will def post pics and any lessons learned as I …

2024年9月2日 · 1969 J3600, Buick V8, T18 3 spd. It has a PTO on back of the Trfr case with an engagement shaft that rotates about 90 degrees. I put the case shifter in the midway point between 4H and 4L, which was the only location the truck would stay put when I put the trans in gear and let the clutch out.

2007年9月11日 · MaxKlinger and FLATBEDFORD, the 6 bolt mounting flange is an SAE standard used by all O.E.M.'s and component manufacturers.There is also an 8 bolt version. PTO's themselves are made for specific transmissions and while they will bolt up they don't ( with rare exceptions) interchange.

2015年9月24日 · T-18 with a PTO Jump to Latest Follow 2K views 5 replies 3 participants last post by tripmaker Sep 25, 2015