The T210+ Test Source is used to test Thorn Security S200 and S200+ Series of infra-red flame detectors in both safe and hazardous areas. The T210+ is ATEX/IECEx approved for use in zones 1 and 2 for group IIC gasses rated T1 - T4.

S200+. Triple IR Blackbody Rejection The MINERVA® S200+ implements a new concept for eliminating nuisance alarms from modulated blackbody sources. The design incorporates a novel optical filter which enables a single infrared sensor to measure the radiated energy present in two separate wavebands placed on either side of the flame

The MINERVA S200+ offers a significantly increased sensitivity to flame with the ability to detect a fully developed 0.1 m2 n-heptane pan fire at up to 50 m. This increase is made possible by precisely predicting non-flame energy in the flame detection waveband thus enabling discrimination of the signal from a smaller flame. These

View and Download Tyco T210+ leaflet online. T210+ test equipment pdf manual download.

2023年12月20日 · 优化产品线S200、S200 Basic，具有各种通信功能，如PROFINET RT/IRT、脉冲串、模拟、Modbus。 配合DriveSim Basic实现设备的数字化仿真，降低了设计和工程阶段的风险和成本，使设备快速上市。

S200-24T4S-QA2没有PoE模式状态指示灯，其余指示灯标识及含义与S200-24P4S-A2相同，请参考S200-24P4S-A2。 设备的电源配置方式为内置单交流电源供电，不支持可插拔的电源模块。 设备无风扇，散热类型为自然散热。 1800m～5000m，海拔每升高220m最高温度规格降低1°C。 设备不支持在环境温度低于0°C时启动。

Adaptateur requis pour le T210+ à utiliser avec les détecteurs de flammes S200 et S200 Plus.

Shaft Torque Sensor T210: Measurement of Rotating Torque up to 200 N·m. The torque transducer T210 features a precise measuring system which transmits the measurement values as well as the supply energy in a contactless way from the rotor to the stator. Additionally, the rotational speed and the angle of rotation are captured.

2024年10月8日 · 随着西门子新一代伺服驱动系统sinamics s200 profinet 版本的推出，sinamics s200 将与 simotics s-1fl2 与 motion connect 350/380 相结合，作为新型单轴 ac/ac 伺服系统，增强了伺服驱动产品的竞争力并扩大了西门子在标准伺服市场的产品组合覆盖范围。

该系统包括 SINAMICS S200 伺服驱动器、SIMOTICS S-1FL2 伺服电机和 Motion Connect 电缆。 其功率范围为 0.1kW 至 7kW，配备有 PROFINET IRT 和脉冲序列等多种通信选项，专为满足各种标准应用而设计。