2017年1月12日 · There are two types of pinouts for terminating twisted pair cable with a 8P8C (RJ45) connector: But why must one not simply align the wires serially, e.g: Green pair - Orange pair - Blue pair - B...

2015年1月23日 · T568B has always appeared to me to be in much more widespread use. It is true that bulk cat5/6 has variances in the tightness of the winding of each pair, but that wouldn't cause one spec to be more appropriate than the other.

My question for the experts is.. The two PCs can only ping successfully when I use a regular Ethernet cable (straight-thru, i believe its known as T568A). I have always thought this PC to PC Ethernet link will require a T568B crossover cable instead. This puzzled me.

2016年12月9日 · T568B is an alternate because back when the spec was first written AT&T Merlin phone systems were very common and that is the wiring spec they used so lots of commercial properties were wired that ...

2015年10月13日 · A lot of the patch cords I currently have are T568B, and I'd like to reuse some. Would that cause any problems? For example a run might be. Computer<->Patch cord (T568B)<->Wall jack (T568A)<->Patch Panel Port (T568A)<->Patch Cord (T568A)<->Switch Port I can't imagine that it would be a problem, but I just wanted to be sure.

Stack Exchange Network. Stack Exchange network consists of 183 Q&A communities including Stack Overflow, the largest, most trusted online community for developers to learn, share their knowledge, and build their careers.

2022年1月13日 · I wired up a ~40m long CAT6 cable following T568B pinout. According to my tester, pins #6 and #8 are not functional. I have re-wired both ends several times to make sure it's not my poor crimping; looks like the cable must have some damage.

2016年9月18日 · The wire in between the two devices has two termination points (two ends), and those ends have 8 wires, grouped into 4 pairs, and are placed in an order that is governed by T568a or T568b -- hopefully to properly introduce a crossing of the pairs on the wire (crossover cable) or to ensure there is no crossing of the pairs on the wire (straight ...

2018年3月21日 · In theory, this requires the normal T586A/T568B crossover cable between two MDI ports or two MDI-X ports. Furthermore, the other two pairs would need to be crossed as well in order to match the expected transmitter-receiver pairs, requiring a special gigabit crossover cable as detailed in IEEE 802.3 Clause 40.8.2 Crossover function .

You must use a TIA/EIA wiring standard, either TIA/EIA T568A (normally used for home networking) or TIA/EIA T568B (usually used in business networking). Either wiring standard will work, but you probably want the cable wired straight-through. You may need a crossover (one side T568A and the other T568B) under certain circumstances.